Phone Commands
Panel Function | Phone Command |
|
|
ARM Doors/Windows with No Entry Delay | ‚ + CODE + 2 + 2 + 3 + 3 |
and Motions with Latchkey |
|
|
|
Lights On/Off | ‚ + CODE + 0 |
|
|
System Status | ‚ + CODE + # + 1 |
|
|
AVM | ‚ + CODE + 5 + X (X = a command |
| from the Audio Verification Set, |
| 1=Talk, 2=VOX, 3=Listen) |
|
|
Hang Up | ‚ + CODE + 9 |
|
|
If you are interactive with your panel and the panel hangs up on you, the system is calling in a report to the central monitoring station or a pager, due to an action made by you or someone at the security system site.
How to Use Your Touchpads
SYSTEM
STATUS
ARM
Doors &
Windows
ARM
Motion
Sensors
Touchpads are used to control the security system from any location within or near your home.
Remote Handheld Touchpad
Interfacing with the system using a Remote Handheld Touchpad is similar to using the panel.
System Status
Press System Status once to hear information about your system from the panel. See “Status Beeps”.
ARM Doors & Windows
Press Arm Doors & Windows button once to turn the security system protection on for all protected doors and windows.
DISARM
1 2 3
4 5 6
7 8 9
On | Off |
EMERGENCY- Press & Hold Both Keys
Note
Depending upon how your dealer programmed your panel, you may be required to enter your access code to arm the system.
Press twice to eliminate the
ARM Motion Sensors
Press Arm Motion Sensors button once to turn protection on for all Motion Sensors. Use when no one is home. This is usually used in combination with ARM Doors & Windows. Press twice to activate the Latchkey feature.
Disarm
Press Disarm button once and enter your access code using the NUMERIC buttons to turn security protection off. To subdisarm the system, enter the master access code.
Subdisarm
Enter your master access code using the NUMERIC buttons while the system is dis- armed. Panel will announce, system disarmed. The Disarm button on the panel will begin to blink.
Security Pro 1000 | 11 |