GE 1000 Phone, Keychain, Touchpad, Touchpad, Touchpad, Touchpad, Control Panel, Control Panel, Quick Reference Table

Quick Reference Table

How to …		Control Panel			Remote Handheld			Keychain	Remote
						Touchpad		Touchpad	Phone
How to …		Control Panel				Touchpad		Touchpad	Phone
Disarm the		+ Access Code			Disarm	+	Access Code	Press once	Press * +
System (Level 1)									Code + 1
		Disarm
Subdisarm the		Enter Master Code while			Enter Master Code while				Press * + Master
System (Level 0)		system is disarmed			system is disarmed				Code + 1
Arm Only - Doors		Doors &
		Windows			ARM		Press once		Press * +
& Windows				Press once				Press once
					Doors &
(Level 2)		Arm			Windows				Code + 2
Arm Only –		Motion			ARM
		Sensors					Press once		Press * +
Motion Sensors				Press once	Motion
(Level 3)					Sensors				Code + 3
		Arm
Arm Doors,		Doors & Motion		Press	ARM		ARM
Windows & Motion		WindowsSensors		each	Doors &		Motion	Press twice	Press * +
					Windows		Sensors
Sensors	~			button					Code + 2 + 3
					Press each button once
(Level 4)		Arm		once
		Doors &
Activate No Entry		Windows			ARM		Press twice	Press once (if
									Press * +
				Press twice	Doors &
Delay								programmed)
		Arm			Windows				Code + 2 + 2
		Motion
Activate Latchkey		Sensors			ARM				Press * +
				Press twice			Press twice	Press 3 times
Feature					Motion				Code + 3 + 3
					Sensors
		Arm
Activate a Panic						Press both		Press both
						Emergency buttons
				Press twice				& hold for
Alarm						and hold for 3
		Police						3 seconds
						seconds
Check the System		System
		Status		Press once	SYSTEM		Press once		Press * +
Status					STATUS				Code + # + 1
Set Doors or		Chime		Press either
		Doors Motion
Special Motion to				Doors or
Chime		Bypass		Motion once
Direct Bypass a			Press once to
			bypass, then
Sensor			code. Press
		Bypass	again to unbypass
Turn Time		Time
Activated Lights				Press once
On/Off			Lights
On/Off		Sensor
Turn Sensor
Activated Lights				Press once
On/Off		Lights
On/Off
Turn On Special						+	Unit #	Press once
Lights
		On
Turn All Lights				Press twice		Press twice		Press once	Press * +
On		Lights							Code + 0
Turn All Lights		Off
				Press twice		Press twice		Press once	Press * +
Off		Lights							Code + 0

~Automatically activates Energy Saving Mode for systems with an RF Thermostat