Version 3

START MENU

 

Delete Cancel

Test

Add

*Press for program information.

 

MAIN MENU

Access

Clock

Light

Sensor/

Control

Option # Remote

Code

Set

* * *

System should be checked by a qualified technician at least every three years.

422-2806 Rev A

 

 

0

 

Unit #

Entry/Exit

 

Delay

 

 

*

Instruction

4

5

 

 

Summary

 

 

Add Option

Option #1: Panel Beeps

Option #2: Panel VoiceDONE

Option #3: Latchkey Time

Option #36: Sensor Activated Light Lockout Start Time

Option #37: Sensor Activated Light Lockout Stop Time

Option #41: Chime Voice

Option #42: Speaker Volume

Option #43: Pager Phone Number

Option #55: Status Beep Volume

 

1

2

3

CONTROL MENU

 

 

Sensors

Time

-

Hours +

* *

6 7 8

- Minutes +

Add Access Code

Add Access Code DONE

Press , then

See Note

use red numbers to enter 4-digit code.

Set Clock

Note:

Hold key or press repeatedly until you hear the desired item.

9

Delete

To delete an option or access code

Delete

press and follow the voice prompting.

Cancel

If you make a mistake or want to

Cancel

start over press

Sensor or Phone Test

Test

Add

Option #

Clock Set Hours Minutes

DONE

Press

and follow voice prompts.

Press

 

 

See Note

See Note

 

To select a test, press

and

follow the voice prompting.

Note

The Master access code is 1-2-3-4 when the panel is shipped. You should change your Master Access Code after your system is installed (see “Access Code”).

2.Enter the Master Access Code.

3.The system voice will prompt you to begin with the START MENU.

The START MENU includes the following buttons:

•Add

•Delete

•Cancel

•Test

•Clock Set

Press the appropriate button.

4.After pressing the appropriate button on the START MENU, the system voice will prompt you to use the MAIN MENU.

The MAIN MENU includes the following buttons:

•Light Control

•Option #

•Sensor/Remote

•Access Code

Press the appropriate button. Depending on the button you pressed, the system will prompt you to continue by pressing other buttons on the panel.

Access Codes

Your security system has a master access code and access codes 1-5 used for arming and disarming the panel. The master code is used for disarming and programming your sys- tem. Access codes 1-5 are generally used for children or as temporary codes for a baby- sitter or service personnel.

14

Security Pro 1000