Note

Codes are always needed to disarm the system. Depending on the panel configura- tion, codes may be needed to arm the system. Check with the installer for your system configuration.

Your system may be set up so that the master code or an access code is required when arming. If so, the panel will prompt you to enter a code when you attempt to arm the system.

Note

Because different codes can be entered using the same button presses, you have to use caution when programming different codes. You need to ensure that one access code does not use the same button presses as other access codes. For example, if the master code is 1234, do not program another code to be 2244. The panel would interpret these codes to be the same code.

￿How to change an Access Code:

1.Open the cover of the panel.

2.The panel voice prompts you to Use numbered keys to enter ID. Enter your mas- ter access code using the numbered keys.

3.The panel voice prompts you to Please select from START MENU. Press the Add button on the START MENU.

4.The panel voice prompts you to Select from MAIN MENU. Press the Access Code button on the MAIN MENU.

5.The panel voice responds with Master Code, press again for next access code, DONE to select or press CANCEL to quit. Press the access code button again to hear the next access code. When you hear the access code you wish to change press the DONE Button.

6.Enter 3-6 new numbers using the numbered keys. (Access Code length is pro- grammed by the installer.)

7.Close the panel cover.

￿How to Delete an Access Code:

Delete Access Code

Delete

1.Open the cover of the panel.

2.The panel voice prompts you to Use numbered keys to enter ID. Enter your mas- ter access code using the numbered keys.

3.The panel voice prompts you to Please select from START MENU. Press the Delete button on the START MENU.

4.The panel voice prompts you to Select from MAIN MENU. Press the Access Code button on the MAIN MENU.

5.The panel voice responds with Access Code 1, press again for next access code, DONE to select or press CANCEL to quit. Press the access code button again to hear the next access code. When you hear the access code you wish to delete, press the DONE Button. The panel voice responds with Access Code X deleted.

6.Close the panel cover.

Light Control

You system has the ability to control lights from the panel. A specific light or group of lights can be programmed to turn on and off at designated times.

House Code

Refers to a group of lights that can be controlled from the panel.

Note

The panel lists house codes A - O. Ask your installer what house code your lights are set up on. Your house code for lights is ___.

Security Pro 1000

15