ge.com

Problem

 

Possible Causes

What To Do

 

 

 

 

Appliance has odor

 

Interior needs cleaning.

• See Care and cleaning.

Moisture forms on

 

Not unusual during periods

•Wipe surface dry.

outside of appliance

 

of high humidity.

 

Moisture collects inside

 

Too frequent or too long

 

(in humid weather,

 

door openings.

 

air carries moisture

 

 

 

 

Wine bottles touching

• Reposition bottles.

into appliance when

 

 

the back wall.

 

door is opened)

 

 

Frost forms on interior

 

This is normal.

• See the Defrosting section.

surfaces of appliance

 

 

 

 

Door left open.

• Excessive frost may form if the door is left open.

 

 

 

 

 

See the Defrosting section.

 

 

 

•Door is not self-closing. Always make sure that

 

 

 

the door is closed after opening.

 

 

 

•Check to see if a bottle is holding door open.

Appliance too cold

 

Temperature control

•See About the control and settings.

 

 

is set too cold.

 

 

 

 

 

 

 

The room temperature where

•For proper operation, the room temperature should

 

 

the appliance is located is

be equal to or greater than the set temperature

 

 

too cold.

of the appliance.

Temperature in the

 

This is normal.

• After you set the temperature, the display will go

display is not the

 

 

back to showing the actual temperature.

temperature that

 

 

 

was just set.

 

 

 

Condensation on front

 

Appliance is located

• Wipe off the condensation with a clean, dry cloth.

of door

 

in a high humidity environment. • Locate the appliance in a lower humidity

 

 

 

environment.

Water on floor behind

 

Door left open.

• Door is not self-closing. Always make sure that

appliance

 

 

the door is closed after opening.

 

 

 

• Check to see if a bottle is holding door open.

 

 

 

 

 

 

Tilting unit when moving.

• This is normal. The drain pan above the compressor

 

 

 

may be full following defrost. Check to make sure

 

 

 

no water spills when moving the unit.

 

 

 

 

11

Safety Instructions

 

 

Instructions

Installation

 

 

Operating

Care and Cleaning

Instructions

Tips

Troubleshooting

Consumer Support

Page 10 Page 12
Page 11
Image 11
GE 197D4613P004 installation instructions Tips Troubleshooting
Page 10 Page 12

197D4613P004 specifications

The GE 197D4613P004 is a highly advanced component designed for specific industrial applications, particularly in the realm of power generation and distribution systems. This electronic device is recognized for its robustness, reliability, and exceptional performance under demanding conditions.

One of the main features of the GE 197D4613P004 is its versatility, as it can be integrated into various systems, including those used in turbines, generators, and other key components in the energy sector. The device is engineered to provide accurate monitoring, control, and protection for these systems, ensuring optimal performance and safety.

The technology behind the GE 197D4613P004 includes state-of-the-art microprocessor-based control systems. This allows for real-time data processing and analysis, enhancing the capability to respond to dynamic operational conditions. The microprocessor also enables advanced communication protocols, ensuring seamless interaction with other devices and systems within the network.

In terms of characteristics, the GE 197D4613P004 is built to withstand harsh environments. It features a rugged housing that protects against dust, moisture, and vibration, making it suitable for installation in challenging locations. Furthermore, the device is designed with fail-safe mechanisms, which contribute to its reliability and longevity, critical factors in industrial applications where downtime can result in significant financial losses.

Additionally, the GE 197D4613P004 supports various input and output configurations, accommodating a wide range of sensors and actuators. This flexibility enables it to tailor its functionality to specific operational requirements. With built-in diagnostics and troubleshooting capabilities, the device simplifies maintenance procedures, allowing for quicker identification of issues and reducing the risk of unexpected failures.

In conclusion, the GE 197D4613P004 stands out for its combination of advanced technology and rugged design, making it a preferred choice for professionals in the power generation and distribution sectors. Its ability to provide precise control and monitoring, along with its adaptability to various systems, makes it a vital component in enhancing operational efficiency and reliability in challenging industrial environments.
Top Page Image Contents