Safety Precautions, USE of Extension Cords

Safety Instructions

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

Use this appliance only for its intended purpose as described in this Owner’s Manual.

SAFETY PRECAUTIONS

When using electrical appliances, basic safety precautions should be followed, including the following:

Operating Instructions

■This beverage center/wine chiller must be properly installed and located in accordance with these instructions before it is used.

■Do not allow children to climb, stand or hang on the shelves in the beverage center/wine chiller. They could damage the beverage center/wine chiller and seriously injure themselves.

■Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

■Before replacing a burned-out light bulb, the beverage center/wine chiller should be unplugged in order to avoid contact with a live wire filament. (A burned out light bulb may break when being replaced.)

■Keep fingers out of the “pinch point” areas; clearances between the doors and between the doors and cabinet are necessarily small. Be careful closing doors when children are in the area.

■Unplug the beverage center/wine chiller before cleaning and making repairs.

NOTE: We strongly recommend that any servicing be performed by a qualified individual.

■Do not store or install this appliance outdoors.

Care and Cleaning

Troubleshooting

Tips

Consumer Support

DANGER! RISK OF CHILD ENTRAPMENT

PROPER DISPOSAL OF THE BEVERAGE CENTER/WINE CHILLER

	Child entrapment and suffocation are not	Refrigerants
	problems of the past. Junked or abandoned	All refrigeration products contain refrigerants,
	refrigeration products are still dangerous… even	All refrigeration products contain refrigerants,
	refrigeration products are still dangerous… even	which under federal law must be removed prior
	if they will sit for “just a few days.” If you are	which under federal law must be removed prior
	if they will sit for “just a few days.” If you are	to product disposal. If you are getting rid of an old
	getting rid of your old appliance, please follow	to product disposal. If you are getting rid of an old
	getting rid of your old appliance, please follow	refrigeration product, check with the company
	the instructions below to help prevent accidents.	refrigeration product, check with the company
	the instructions below to help prevent accidents.	handling the disposal about what to do.
	Before You Throw Away Your Old	handling the disposal about what to do.
	Before You Throw Away Your Old
	Refrigeration Product:
	■ Take off the doors.
	■ Leave the shelves in place so that children
	may not easily climb inside.

USE OF EXTENSION CORDS

Because of potential safety hazards under certain conditions, we strongly recommend against the use of an extension cord.

However, if you must use an extension cord, it is absolutely necessary that it be a UL-listed, 3-wire grounding type appliance extension cord having a grounding type plug and outlet and that the electrical rating of the cord be 15 amperes (minimum) and 120 volts.

197D4613P004 specifications

The GE 197D4613P004 is a highly advanced component designed for specific industrial applications, particularly in the realm of power generation and distribution systems. This electronic device is recognized for its robustness, reliability, and exceptional performance under demanding conditions.

One of the main features of the GE 197D4613P004 is its versatility, as it can be integrated into various systems, including those used in turbines, generators, and other key components in the energy sector. The device is engineered to provide accurate monitoring, control, and protection for these systems, ensuring optimal performance and safety.

The technology behind the GE 197D4613P004 includes state-of-the-art microprocessor-based control systems. This allows for real-time data processing and analysis, enhancing the capability to respond to dynamic operational conditions. The microprocessor also enables advanced communication protocols, ensuring seamless interaction with other devices and systems within the network.

In terms of characteristics, the GE 197D4613P004 is built to withstand harsh environments. It features a rugged housing that protects against dust, moisture, and vibration, making it suitable for installation in challenging locations. Furthermore, the device is designed with fail-safe mechanisms, which contribute to its reliability and longevity, critical factors in industrial applications where downtime can result in significant financial losses.

Additionally, the GE 197D4613P004 supports various input and output configurations, accommodating a wide range of sensors and actuators. This flexibility enables it to tailor its functionality to specific operational requirements. With built-in diagnostics and troubleshooting capabilities, the device simplifies maintenance procedures, allowing for quicker identification of issues and reducing the risk of unexpected failures.

In conclusion, the GE 197D4613P004 stands out for its combination of advanced technology and rugged design, making it a preferred choice for professionals in the power generation and distribution sectors. Its ability to provide precise control and monitoring, along with its adaptability to various systems, makes it a vital component in enhancing operational efficiency and reliability in challenging industrial environments.

GE 197D4613P004 Safety Precautions, USE of Extension Cords, Operating Instructions

Models: 197D4613P004