CALLER ID
Caller ID information is retrieved between the first and second ring.
In the display, the unit shows the number of calls, the caller's name, the caller's telephone number, the day and time.
The name, telephone number, time and day of a call are recorded.
SETTING THE AREA CODE
1.Hold the DIAL button until the unit announces the first number.
2.Press the REVIEW or SKIP buttons to scroll through the numbers until you reach the first number of the area code.
3.Press the DIAL button to set the first number.
4.Repeat Steps 2 and 3 for the next two numbers.
When the DIAL button is pressed after the third number, the unit announces the area code for confirmation.
If no area code is set, the unit always dials the area code with the number.
RETRIEVING INFORMATION
1.Press the CID button. The display shows "X new calls" or "X calls," if they are old.
2.Press the REVIEW or SKIP button to scroll through the stored information.
The unit displays "end of list" when there is no more information to show.
To play messages while in CID mode, press the PLAY button when you find an entry with a message attached.
4.Press the CID button to exit the CID mode and return to the Idle mode.
17
