![](/images/new-backgrounds/1140547/14054719x1.webp)
GETTING STARTED
NOTE: During these processes, if no button is pressed for approximately one minute, the unit will return to the Idle mode.
SETTING THE DATE AND TIME
1.Hold the TIME SET button until the unit announces "Monday."
2.Press the REVIEW or SKIP buttons to scroll through the days.
3.Press the TIME SET button to accept the day.
The unit announces "12 a.m.".
1.Press the REVIEW or SKIP buttons to scroll through the hours until you reach the current hour.
2.Press the TIME SET button to accept the current hour.
The unit announces "0."
1.Press the REVIEW or SKIP buttons to scroll through the minutes.
2.Press the TIME SET button to accept the current minutes.
The unit confirms the set time.
SETTING THE SECURITY/USER CODE
1.Hold the CODE button until the unit announces the first number.
2.Press the REVIEW or SKIP buttons to scroll through the numbers
3.Press the CODE button to accept the number.
Repeat Steps 2 and 3 to complete the code. When the third number is set, the unit announces the full code for confirmation.
To check the code at any time, press the CODE button.
10