About the automatic icemaker. | www.GEAppliances.com |
A
Safety
Power
Switch
Icemaker
Green | Feeler Arm |
Power Light |
Shelf
Ice Drawer
Pull the upper freezer shelf straight out to access the icemaker. Always be sure to replace the shelf. The shelf can be used for storage.
Automatic Icemaker
The icemaker will produce seven cubes per
If the refrigerator is operated before the water connection is made to the icemaker, set the power switch in the O (off) position.
When the refrigerator has been connected to the water supply, set the power switch to the l (on) position.
The icemaker will fill with water when it cools to 15°F
Throw away the first few batches of ice to allow the water line to clear.
Be sure nothing interferes with the sweep of the feeler arm.
When the bin fills to the level of the feeler arm, the icemaker will stop producing ice. It is normal for several cubes to be joined together.
If ice is not used frequently, old ice cubes will become cloudy, taste stale and shrink.
If ice cubes get stuck in the icemaker, the green power light will blink. To correct this, set the power switch to O (off) and remove the cubes. Set the power switch to I (on) to restart the icemaker. After the icemaker has been turned on again, there will be a delay of about 45 minutes before the icemaker resumes operation.
NOTE: In homes with
Instructions Operating Instructions Installation Instructions
Ice Storage Drawer
To access ice, pull the drawer forward.
To remove the drawer, pull it straight out and lift it past the stop location.
Ice Drawer
13
