GE 200D2600P010 Replacing the lightbulbs, Instructions Operating, Freezer Compartment, Dispenser

Models: 200D2600P010

1 116
Download 116 pages 46.08 Kb
Page 17
Image 17
Replacing the lightbulbs.

Replacing the lightbulbs.

www.GEAppliances.com

Setting the controls to OFF does not remove power to the light circuit.

Safety

Refrigerator Compartment—Upper Light

Refrigerator Compartment—Upper Light Unplug the refrigerator.

Instructions Operating The bulbs are located at the top of the

Tabscompartment, inside the light shield. On some models, a screw at the front of the light shield will have to be removed.

Refrigerator Compartment—Lower Light To remove the light shield, press in on the tabs on the sides of the shield and slide forward and out.

This light is located above the top drawer. After replacing the bulb with an appliance bulb of the same or lower wattage, replace the light shield and screws (on some models). When replacing the light shield, make sure that the tabs at the back of the shield fit into the slots at the back of the light shield housing.

Freezer Compartment Plug the refrigerator back in.

Instructions Operating

Refrigerator Compartment—Lower Light

This light is located above the top drawer.

Dispenser Unplug the refrigerator.

Manual background Remove the convertible meat drawer control knob by pulling straight out.

Manual background Lift the light shield up and pull it out.

Manual background After replacing the bulb with an appliance bulb of the same or lower wattage, replace the shield and the knob.

Manual background Plug the refrigerator back in.

Freezer Compartment

Manual background Unplug the refrigerator.

Manual background Remove the shelf just above the light shield. (The shelf will be easier to remove if it is emptied first.) On some models, a screw at the top of the light shield will need to be removed.

Manual background To remove the light shield, press in on the sides, and lift up and out.

Manual background Replace the bulb with an appliance bulb of the same or lower wattage, and reinstall the light shield. When reinstalling the light shield, make sure the top tabs snap securely into place. Replace the screw

(on some models).

Manual background Reinstall the shelf and plug the refrigerator back in.

Instructions Installation Instructions Troubleshooting

Dispenser

Unplug the refrigerator.

Replace the bulb with a bulb of the

The bulb is located on the dispenser

same size and wattage.

 

under the control panel.

Plug the refrigerator back in.

Remove the lightbulb by turning

 

it counterclockwise.

 

17

Tips Consumer Support

Page 17
Image 17
GE 200D2600P010 Replacing the lightbulbs, Instructions Operating, Refrigerator Compartment-Upper Light, Dispenser, Safety