Install the Side Trim.
These pieces are tucked inside the refrigerator door handle.
Do not remove the protective film on the outside of the Side Trim until the Side Trim is installed.
Fit the bottom of the Side Trim under the Bottom Trim as illustrated.
Hold the Side Trim against the front face of the decorator panels and fit the Side Trim under the Top Trim. Make sure the Side Trim is fitted correctly and that you are satisfied with the appearance of all the parts before pulling the tape liner.
Safety Instructions Operating
Secure the Side Trim.
Place one hand between the two pieces of tape liner and hold the Side Trim firmly against the panels and the side of the door.
Pull the top tape liner up about 3″ (80 mm), pressing the trim with your hand as the adhesive is exposed to the door. Then pull the bottom tape liner down about 3″ (80 mm). Follow the tape with your hand, pressing the trim adhesive against the door.
Continue pulling the tape liner loose, alternating between the top and bottom and pressing the Side Trim against the door.
Instructions Installation
Remove the Protective Film From the Outside of the Side Trim.
Top Trim
Side
Trim
Tape
Liner 
Tape
Liner
Side
Trim
Bottom Trim
21
