GE 200D2600P010 Inserting the door panels, Insert the Freezer Panel and Fresh Food Panel

Models: 200D2600P010

1 116
Download 116 pages 46.08 Kb
Page 20
Image 20
Inserting the door panels.

Consumer Support Troubleshooting Tips Installation Instructions Operating Instructions Safety Instructions

Inserting the door panels.

Read these instructions completely and carefully.

 Loosen the Top Trim on the Freezer and Fresh Food Doors. Loosen the Top Trim on the Freezer and Fresh Food Doors.

Using a T-20 Torx driver, loosen the two screws attaching the Top Trim about 1/4″ (6 mm).

 Insert the Freezer Panel and Fresh Food Panel. Insert the Freezer Panel and Fresh Food Panel.

Lift the Top Trim up 1/4″ (6 mm) and carefully

If your model has a dispenser and/or a

push the freezer panel in until it slides into the slot

Refreshment Center, this step only applies

behind the door handle. Push the filler panel

to the top panels.

(required with some door panels) in behind the

 

decorator panel. Repeat for fresh food panel.

 

 Insert the Bottom Panel. Insert the Bottom Panel.

Carefully push the panel in until it slides into the slot behind the door handle. Push the filler panel (required with some door panels) in behind the decorator panel.

 Hand tighten the two screws on the Top Trim. Hand tighten the two screws on the Top Trim.

Cut-Out

Top Trim ScrewsManual background

Cut-Out

Top

Freezer Manual background

Panel

Fresh

Food

Panel

Tape Liner Manual background

Bottom

Freezer

Panel

Side Trim

Side Trim Manual background

20

Page 20
Image 20
GE 200D2600P010 Inserting the door panels, Loosen the Top Trim on the Freezer and Fresh Food Doors