GE 27730 Allow the phone to charge for, hours before using the first, phone properly for 12 hours

Allow the phone to charge for
12 hours before using the first
time. If you don't charge the
phone properly (for 12 hours)		7
when you first set up the
phone, performance of the
battery will be compromised.	5	6

5. After charging, remove and reattach the mounting bracket by inserting the two tabs at the top and then snapping the tab at the bottom into place.

6.Plug the telephone line cord into the phone jack on the back of the unit and then into the wall phone jack.

7.Slip the mounting holes over the wall plate posts and slide the unit down firmly into place. (Wall plate not included.)

NOTE : The phone automatically defaults to touch-tone dialing. To change to pulse (rotary) dialing, see “Tone/Pulse Dialing.” If you don’t know which type of service you have, check with the phone company.

CAUTION: Use only the ATLINKS USA 5-4081B power supply that came with this unit. Using other power supplies may damage the unit.

9