28
Operating Your Phone
Call Timer
The display shows the duration of the current call.
After you hang up, the total duration displays briey.
Making a Call
1. Press , then dial the number you want.
- OR -
Dial the number rst, then press .
- OR -
Press to enter your phonebook, scroll to desired
name, then press .
- OR -
Press and release to access Received Calls list
or press and hold to access Dialed Calls list,
use or to scroll to desired number, then press
.
Answering Calls
If Auto-Talk is set to On and the Handset is in
the charge cradle, simply pick up the handset
(when ringing) and the phone will answer the call
automatically.
If the handset is NOT in the charge cradle or Auto-talk
is turned Off, press to answer the call.
Providing you have subscribed to your network’s
Caller-ID service, the caller’s number and name is
displayed after the rst ring.
End Call
Press or simply place the handset back on the
charge cradle.
Adjusting Handset /
Speakerphone Volume:
During a call, Use to
increase or to decrease
the volume level. The display
will show the current level : 2
bars are the minimum and 10
bars are the maximum
Silencing a Call:
Press when receiving
an incoming call to silence the
ringer. The handset displays a
red X in the CID information.
Adjusting Handset /
Speakerphone Volume:
During a call, Use to
increase or to decrease
the volume level. The display
will show the current level : 2
bars are the minimum and 10
bars are the maximum
Silencing a Call:
Press when receiving
an incoming call to silence the
ringer. The handset displays a
red X in the CID information.
NOTE: If you make a mistake,
while entering the number,
press to delete the last
digit entered or multiple times
to clear all digits.
NOTE: If you make a mistake,
while entering the number,
press to delete the last
digit entered or multiple times
to clear all digits.
To switch to speakerphone:
At any time during a call, just
press , to switch back to
handset mode, press
again. While in speakerphone
mode, the display will show a
speakerphone icon.
To switch to speakerphone:
At any time during a call, just
press , to switch back to
handset mode, press
again. While in speakerphone
mode, the display will show a
speakerphone icon.