Operating Instructions Safety Instructions
Installation | Instructions |
| ENERGY |
| TURBO FREEZE | TURBO COOL | ALARM/ | |
Model 26 | SAVER |
| LIGHT | |||
|
|
| ||||
|
|
|
|
|
| |
|
|
|
| Light ON/OFF | ||
|
|
|
|
|
| (Hold 3 seconds) |
|
|
|
| CLIMATE KEEPER |
|
|
| ADJUST |
|
| ADJUST | ||
| FREEZER |
| ˚F | ˚F | REFRIGERATOR | |
| (Hold 3 sec | 38˚ F Recommended | (Hold 3 sec | |||
for Turbo Freeze) |
|
| for Turbo Cool) | |||
|
|
|
|
| ICE |
|
|
|
|
|
| OFF |
|
| ICE & |
|
|
| ICE OFF/ | |
| WATER |
| RESET FILTER CUBED CRUSHED WATER |
| LOCK | |
| (Hold 3 sec |
|
| (Hold 3 sec | ||
| to Reset Filter) |
|
| to Lock Control) |
Model 29
NOTE: The refrigerator is shipped with protective film coveringthe temperature controls. If this film was not removed during installation, remove it now.
The temperature controls are preset in the factory at 38°F for the refrigerator compartment and
the freezer compartment. Allow 24 hours for the temperatureto stabilize to the preset recommended settings.
The temperature controls can display both the SET temperature as well as the actual temperature in the refrigerator and freezer.The actual temperature may vary slightly from the SET temperaturebased on usage and operating environment.
ADJUST
REFRIGERATOR
(Hold 3 sec
for Turbo Cool)
ADJUST
FREEZER
(Hold 3 sec
for Turbo Freeze)
To change the temperature, press and releasethe ADJUST FREEZER or ADJUST REFRIGERATOR pad. The displaywill show the actual temperature. To change the temperature, tap eitherthe ADJUST FREEZER or ADJUST REFRIGERATOR pad until the desiredtemperature is displayed.
Once the desired temperature has been set, the temperature display will return to the actual refrigerator and freezer temperatures after 10 seconds. Several adjustments may be required.
Each time you adjust controls, allow 24 hoursfor the refrigerator to reach the temperatureyou have set.
12