Operating Instructions Safety Instructions
Installation | Instructions |
Consumer Support Troubleshooting Tips
Before you call for service…
TroubleshootingTips
Problem | Possible Causes | What To Do |
|
|
|
Water filter indicator | This is normal. | • The water filter indicator lightshowsthe following: |
light changed color |
| Green = Good |
|
| Orange = Change soon |
|
| Red = Change immediately |
|
| • See About the water filter for more information. |
|
|
|
Water filter indicator light | Water filter indicator must | |
remains red even after | be reset. | • Press and holdthe ICE & WATER pad for 3 seconds. |
replacing the water filter |
| See About the water filter for moreinformation. |
|
| LCD models: |
|
| • On the LCD screen, select SETTING, then WATER FILTER. |
|
| Select REPLACE and follow the instructions given. |
|
|
|
Water filter indicator | This is normal. This lightwill | • See About the water filter for moreinformation. |
light is not lit | turnorange to tell you thatyou |
|
| need to replace the filtersoon. |
|
| The filter cartridge should be |
|
| replaced when the replacement |
|
| indicator light turns red. |
|
|
|
|
Handle is loose / handle | Handle needs adjusting. | • See Attach the Fresh Food handle and Attach |
has a gap |
| the Freezer handlesectionsfor detailed instructions. |
|
|
|
Refrigeratorbeeping | This is the dooralarm. | • Close door. |
|
|
|
Control setting is not lit | On some models, the light | • If the control settings do not light up, check to see if |
bulbsat the top of the refrigerator the light bulbs are burned out, and replace if necessary. | ||
| compartment light up the |
|
| temperature control settings. |
|
|
|
|
LCD screen freezes | LCD screen needs to be reset. | • Reset the LCD screenby insertinga paperclipinto the |
(LCD models) |
| small hole next to the SD card slotunderthe front edge |
|
| of the dispenser opening (see Screen Functions: Photos |
|
| for location). |
|
|
|
Not cooling.OF/OF | The cooling system is off. | |
appearsin the display |
| • Press and holdthe ADJUST FREEZER and ENERGY SAVER |
|
| pads at the same time for 3 seconds. You will heara beep |
|
| and the OF/OF will disappear.You can now adjustthe |
|
| temperature. Please allow 24 hours for the unit to cool to |
|
| your set temperature. |
|
|
|
Not cooling.OFF/OFF | The cooling system is off. | LCD models: |
appearsin the display |
| • On the LCD screen, selectSETTING, SYSTEM and then |
|
| COOLING SYSTEM until a check mark appears beside |
|
| COOLING SYSTEM. Select HOME. Youcan now adjust the |
|
| temperature. Please allow 24 hours for the unit to cool |
|
| to yourset temperature. |
|
|
|
42