Installation Instructions

6

D

E

F

G

H

REPLACING THE REFRIGERATOR DOORS

(cont.)

Insert the top hinge pin into the hinge hole on top of the refrigerator door.Makesure the dooris aligned withthe cabinet and opposite door.Attach the hingeto the top of the cabinet. Do not tighten boltscompletely.

On left-hand doors, pass the wiresand water line through the top hinge pin. Then connect the waterline and door electrical connector.

Attach the groundwirewith a Phillips-headscrewdriver at the rightand lefthinge.

Make sure the gasket on the door is flush against the cabinetand is not folded. Make surethe dooris straight and the gap between the doorsis evenacross the front. Whileholding the aligned door in place, tighten the top hinge bolts.

Reconnect the two pairs of connectorsat the leftand the one pairof connectors at the right side of the top cap. Reattach the threePhillips-head screwson top.

a

b

a b

 

 

 

Ground

Wire

29

7REMOVE THE FREEZER DOOR

APullthe freezer door open to full extension.

BRemove the freezer bin by pullingboth brackets upward at the same time. (See page 19.)

CTake out the lower basket by liftingthe basket up from the rail system. (See page 19.)

DRemove the two 10 mm hex-head boltsfrom the right and left side.