Installation Instructions
INSTALLING THE REFRIGERATOR (cont.)5REMOVE THE REFRIGERATOR DOORS
AOpen the refrigerator doors.
BRemove the two frontcaps with a
CRemove the threescrews on top with a
DDisconnect all electrical connectors.
ETo disconnect the water coupling, push in on the gray couplingand pullout the tubing.
Gray
Coupling
FRemove the two ground wireswitha
GRemove three 10 mm
Ground
Wire
CAUTION:When the boltsare removed, the door may fall and cause personal injuryand/or damage to the dooritself.
HLift the door straight up to remove.
IRemove the two bolts using a 3/16″ Allen wrench and two
6REPLACINGTHE REFRIGERATOR DOORS
AInstall the center hinge on each side.
BLower the refrigerator door onto the centerhingepin. Ensure that the plastic hinge pin thimble is on the center hinge pin or inside door hinge pin hole located in the bottom of the door.
CSecurely tape the door shut with masking tape or have a second person support the door.
28