GE 45608 manual Groups, Create a Group or Add a Device to a Group, To control a Group

6.When the screen displays SUCCESSFUL, the device has been deleted from your network and reset to its factory defaults.

Groups

You can create a collection of devices (lights / nodes) that you can turn On or Off as a group. You can create up to a maximum of 18 groups. A group can contain up to 232 devices.

Group Setup

Add

Remove

Delete

Label

Create a Group or Add a Device to a Group

1.Enter Z-Wave setup mode and highlight GROUP SETUP

2.Press OK; the screen will display ADD

3.Press OK; the screen will display SEL DIGIT

4.Press a digit (1-9) for the group you wish to add the device to. Press SHIFT and the digit (1-9) if you are adding a device to groups 10 through 18. The screen will display the group you’ve chosen.

5.Press OK; the letter “W” will be displayed in the upper left hand corner and the Z-Wave light will begin blinking indicating the remote is waiting to connect to your device.

6.Press the button on the device so that it communicates with the remote.

7.When the screen displays SUCCESSFUL you have successfully added the Node/Light to a group.

8.To add additional Node/Lights to your group repeat steps 1 thru 10.

To control a Group:

1.When in Z-Wave mode press the GROUP key once to put the remote into “GROUP Control” mode.

2.Press the digit key for the group you wish to control (1-9). Press SHIFT and the digit (1-9) if you are controlling groups 10 through 18. The screen will display the selected Group.

•To turn a GROUP on, press and release the CH + key for less than one second. The screen will display ON above the selected GROUP.

29