30
• To turn a GROUP off, press and release the CH - key for less
than one second. The screen will display OFF above the
selected GROUP.
Removing a Device (Node / Light) From a Group:
This only removes the device from a specific group. The device is
still part of your home control network and the group still exists (if
there were more than one device in it to start).
1. Enter Z-Wave setup mode and highlight GROUP SETUP
2. Press OK; the screen will display ADD
3. Press the right arrow key once; t he screen will display REMOVE
4. Press OK; the screen will display SEL DIGIT
5. Press a digit (1-9) for the group you wish to remove the device
from. Press SHIFT and the digit (1-9) if you are removing a
device from groups 10 through 18. The screen will display the
group you’ve chosen.
6. Press OK; the letter “W” will be displayed in the upper left hand
corner and the Z-Wave light will begin blinking indicating the
remote is waiting to remove your device.
7. Press the button on t he device so it communicates with
the remote.
8. When the screen displays SUCCESSFUL you have successfully
removed the Node/Light from the group.
Deleting a Group
This only deletes the specific group. All of the devices are still part
of your home control network.
1. Enter Z-Wave setup mode and highlight GROUP SETUP
2. Press OK; the screen will display ADD
3. Press the right arrow key t wice; the screen will display DELETE
4. Press OK; the screen will display SEL DIGIT
5. Press a digit (1-9) for the group you wish to remove the device
from. Press SHIFT and the digit (1-9) if you are removing a
device from groups 10 through 18. The screen will display the
group you’ve chosen.
6. Press OK; the screen will display SUCCESSFUL to indicate the
group has been deleted.
ScenesA scene is a single device or group of devices that can be preset to
turn on to a previously specified setting (for example, brightness
level). Scenes are ideal for task or mood lighting. You can set up
a maximum of 18 scenes, containing up to 32 devices per scene.