41
6. Place the Secondary remote in RECEIVE mode. See the
following section on “Receiving Network and Device
Information” if the Secondary remote is a GE 45608 remote.
If the Secondary remote is a different GE model or different
brand, please refer to its instructions for details.
7. After the Secondar y remote is in the RECEIVE mode press
OK on the Primary remote; the screen will display SENDING.
The Primary remote then transmits the network and device
information to the new Secondary remote.
8. Both remotes should indicate a successf ul completion of the
copying process.
a. The 45608’s screen will display SUCCESSFUL.
b. Other GE models or other brands will indi cate success in
various ways, depending on the remote’s capabilities.
Please refer to its instructions for details.
Receiving Network and Device Information 1. Enter Z-Wave setup mode and highlight TRANSFER
2. Press OK; the screen will display CREATE SECONDARY
3. Use the ARROW keys to scroll to RECEIVE.
4. Press OK; the screen will display RECEIVING
5. Place the Primary remote in “Transmit” mode. Se e the previous
section on “Creating a Secondary Controller” or “Controll er
Swap” if the Primary controller is a GE 45608 remote. If the
Primary remote is a different GE model or different brand,
please refer to its instructions for details.
6. After the Primar y remote is in the “Transmit” mode, press OK
on this remote; the screen will display RECEIVING. The Primary
remote then transmits the network and device information to
the new remote.
7. Both remotes should indicate a successf ul completion of the
copying process.
a. The 45608’s screen will display SUCCESSFUL.
b. Other GE models or other brands will indi cate success in
various ways, depending on the remote’s capabilities. Please
refer to its instructions for details.