GE 45608 manual Advanced Configuration, Adding a Thermostat, Controlling a Thermostat, Delete

Adding a Thermostat:

1.Enter Z-Wave setup mode and highlight THERMOSTAT

2.Press OK and the screen will display ADD

3.Press OK and the screen will display SETUP WAITING

4.Press the button on the thermostat’s Z-Wave interface

5.When the screen displays SUCCESS, you have successfully added the THERMOSTAT to your remote control.

Controlling a Thermostat:

The features and functions that can be controlled vary by manufacturer and you will need to review the user manual that was provided to determine capabilities of your THERMOSTAT.

If supported by the thermostat, the 45608 LCD remote allows you to check room temperature, adjust HVAC system modes (Heat, Cool, Auto, Fan, etc.) and adjust temperature settings (SETPOINT).

Note: Your HVAC system may have to be set to “HEAT or “COOL’” mode in order to remotely check and/or adjust the room temperature. “AUTO” mode may not provide this function.

Deleting a Thermostat:

1.Enter Z-Wave setup mode and highlight THERMOSTAT

2.Press OK and the screen will display ADD

3.Use either ARROW keys to scroll until the screen displays

DELETE

4.Press OK and the screen will display SETUP WAITING

5.Press the button on the thermostat’s Z-Wave interface

6.When the screen displays SUCCESSFUL, you have successfully deleted the thermostat.

Advanced Configuration

Some Z-Wave devices provide advanced capabilities available only through the use of a remote control like the GE 45608. One example is the GE 45606 in-wall dimmer which allows the end user to change whether the LED is illuminated when the light is On or when the light is Off. Please refer to the instructions of your Z-Wave device for available options and specific instructions on changing its advanced configuration.

Adv. Config.

Parameter

Number of

Bytes

Configuration

Value

37