Inserting the door panels.

Remove the Top Trim on the Freezer Door

Using a T-20 Torx Driver, remove the two screws attaching the Top Trim.

Remove the Side Trim

Using a Phillips screwdriver, remove the four screws attaching the Side Trim to the refrigerator and freezer doors (2 screws on each door).

Insert the Freezer Door Panel

Lower the freezer panel until it slides into the slot behind the door panel. Push the filler panel (required with some door panels) in behind the decorator panel.

Reinstall the Top Trim on the Freezer Door

Using a T-20 Torx Driver, reinstall the two screws attaching the Top Trim. Tighten two screws to 30 in-lbs torque.

Insert the Refrigerator Panel

Carefully push the panel in until it slides into the slot behind the door handle. Push the filler panel (required with some door panels) in behind the decorator panel.

Safety Instructions Operating Instructions Installation

Top Trim

Screw Holes

Cut out

Freezer

Panel

Refrigerator

Panel

Cut out

Blue Tape Liner

Side Trim Freezer

Side Trim Refrigerator

Blue Tape Liner

15

Instructions Troubleshooting Tips Consumer Support

Page 15
Image 15
GE 162D9625P005, 49-60111 Inserting the door panels, Instructions Troubleshooting Tips Consumer Support

162D9625P005, 49-60111 specifications

The GE 49-60111, also known as 162D9625P005, is a highly regarded component within the realm of gas turbine engines, specifically engineered for applications in industrial and aerospace sectors. This product exemplifies General Electric's commitment to advancing power generation technologies with outstanding performance, efficiency, and reliability.

One of the main features of the GE 49-60111 is its robust construction, designed to withstand high temperatures and pressures often encountered in gas turbine operations. The component plays a crucial role in enhancing the overall thermal efficiency of the engine, which is a critical factor in fuel consumption and environmental impact.

The technology behind the GE 49-60111 integrates advanced materials and manufacturing techniques. This includes the use of high-performance alloys that provide enhanced durability while minimizing weight. The component is designed to maintain structural integrity under extreme operational conditions, which is vital for sustaining the engine's longevity and ensuring safety.

Another notable characteristic of the GE 49-60111 is its aerodynamic design. The component features optimized geometries that facilitate improved airflow, contributing to higher combustion efficiency. This design not only boosts performance but also contributes to lower emissions, aligning with modern regulatory requirements and environmental standards.

In terms of maintenance, the GE 49-60111 is engineered for ease of serviceability. Its design allows for straightforward inspection and replacement, minimizing downtime and maintenance costs for operators. This focus on maintenance efficiency is particularly valuable in industrial settings where operational reliability is paramount.

The GE 49-60111 also epitomizes the integration of digital technologies in modern gas turbine systems. Advanced sensors and monitoring systems are often incorporated to provide real-time data on component performance. This data-driven approach allows operators to predict maintenance needs, optimize performance, and extend the lifecycle of the turbine.

Overall, the GE 49-60111, 162D9625P005, stands as a testament to General Electric's innovation in gas turbine technology. With its combination of durability, efficiency, aerodynamic design, and advanced maintenance features, it serves as a critical component in the pursuit of enhanced power generation capabilities while navigating the challenges of modern energy demands.