About the controls on the refrigerator.

www.GEAppliances.com

Initially set the refrigerator and freezer controls at 5.

If you want colder or warmer temperatures, adjust the

For refrigerator and freezer, 5 is normal, 9 is coldest.

refrigerator temperature first. When satisfied with that

Line up the setting with the dot.

setting, adjust the freezer temperature.

 

 

 

Freezer

3

5

7

6

5

4

Refrigerator

 

Control Settings

Freezer Control

The freezer control maintains the temperature in the freezer compartment.

Refrigerator Control

The refrigerator control maintains the temperature throughout the refrigerator compartment.

Moving the refrigerator control to OFF stops cooling in both areas— refrigerator and freezer— but does not shut off power to the refrigerator.

After changing the controls, allow 24 hours for the refrigerator to reach the temperature you have set.

IMPORTANT!

When placing food packages in the refrigerator or freezer compartments, make sure that they do not prevent the doors from fully closing. A partially open door will cause abnormally high temperatures that may affect food preservation and will result in higher energy consumption.

5

Safety Instructions Operating Instructions Installation Instructions Troubleshooting Tips Consumer Support

Page 4 Page 6
Page 5
Image 5
GE 162D9625P005, 49-60111 About the controls on the refrigerator, Freezer Control, Refrigerator Control
Page 4 Page 6

162D9625P005, 49-60111 specifications

The GE 49-60111, also known as 162D9625P005, is a highly regarded component within the realm of gas turbine engines, specifically engineered for applications in industrial and aerospace sectors. This product exemplifies General Electric's commitment to advancing power generation technologies with outstanding performance, efficiency, and reliability.

One of the main features of the GE 49-60111 is its robust construction, designed to withstand high temperatures and pressures often encountered in gas turbine operations. The component plays a crucial role in enhancing the overall thermal efficiency of the engine, which is a critical factor in fuel consumption and environmental impact.

The technology behind the GE 49-60111 integrates advanced materials and manufacturing techniques. This includes the use of high-performance alloys that provide enhanced durability while minimizing weight. The component is designed to maintain structural integrity under extreme operational conditions, which is vital for sustaining the engine's longevity and ensuring safety.

Another notable characteristic of the GE 49-60111 is its aerodynamic design. The component features optimized geometries that facilitate improved airflow, contributing to higher combustion efficiency. This design not only boosts performance but also contributes to lower emissions, aligning with modern regulatory requirements and environmental standards.

In terms of maintenance, the GE 49-60111 is engineered for ease of serviceability. Its design allows for straightforward inspection and replacement, minimizing downtime and maintenance costs for operators. This focus on maintenance efficiency is particularly valuable in industrial settings where operational reliability is paramount.

The GE 49-60111 also epitomizes the integration of digital technologies in modern gas turbine systems. Advanced sensors and monitoring systems are often incorporated to provide real-time data on component performance. This data-driven approach allows operators to predict maintenance needs, optimize performance, and extend the lifecycle of the turbine.

Overall, the GE 49-60111, 162D9625P005, stands as a testament to General Electric's innovation in gas turbine technology. With its combination of durability, efficiency, aerodynamic design, and advanced maintenance features, it serves as a critical component in the pursuit of enhanced power generation capabilities while navigating the challenges of modern energy demands.
Top Page Image Contents