Installation Instructions

REVERSING THE DOOR SWING

NOTE: Doors on dispenser models and doors with trim do not reverse.

IMPORTANT NOTES

When reversing the door swing:

•Read the instructions all the way through before starting.

•Handle parts carefully to avoid scratching paint.

•Set screws down by their related parts to avoid using them in the wrong places.

•Provide a non-scratching work surface for the doors.

IMPORTANT: Once you begin, do not move the cabinet until door-swing reversal is completed.

These instructions are for changing the hinges from the right side to the left side—if you ever want to change the hinges back to the right side, follow these same instructions and reverse all references to left and right.

Unplug the refrigerator from its electrical outlet.

Empty all door shelves, including the dairy compartment.

TOOLS YOU WILL NEED

Phillips screwdriver

7/16″ and 1/4″ socket

and ratchet

Masking tape

Needle nose pliers

T-20 or T-25 Torx Driver,

 

whichever your model

Putty knife or

requires

thin-blade screwdriver

 

1

REMOVE THE FREEZER DOOR

Tape the door shut with masking tape.

With a 1/4″ socket and ratchet, remove the hinge cover on top of the freezer door.

Remove the two Torx screws that hold the top hinge to the cabinet. Then lift the hinge straight up to free the hinge pin from the socket in the top of the door.

Remove the tape and tilt the door away from the cabinet. Lift it off the center hinge pin.

Set the door on a non-scratching surface with the inside up.

Using a knife or putty knife with the end wrapped in masking tape, pry out the four plug buttons from the left top of the cabinet, and push them into the corresponding holes on the right side.

PARTS YOU WILL NEED

NOTE: The parts listed below can be found in the reversibility kit, which is taped into the bottom shelf of the refrigerator door.

•Right end grille cap

•Left hand cam closure

•Two left hand door stops

25

Page 24 Page 26
Page 25
Image 25
GE 162D9625P005, 49-60111 Reversing the Door Swing, Important Notes, Tools YOU will Need, Remove the Freezer Door
Page 24 Page 26

162D9625P005, 49-60111 specifications

The GE 49-60111, also known as 162D9625P005, is a highly regarded component within the realm of gas turbine engines, specifically engineered for applications in industrial and aerospace sectors. This product exemplifies General Electric's commitment to advancing power generation technologies with outstanding performance, efficiency, and reliability.

One of the main features of the GE 49-60111 is its robust construction, designed to withstand high temperatures and pressures often encountered in gas turbine operations. The component plays a crucial role in enhancing the overall thermal efficiency of the engine, which is a critical factor in fuel consumption and environmental impact.

The technology behind the GE 49-60111 integrates advanced materials and manufacturing techniques. This includes the use of high-performance alloys that provide enhanced durability while minimizing weight. The component is designed to maintain structural integrity under extreme operational conditions, which is vital for sustaining the engine's longevity and ensuring safety.

Another notable characteristic of the GE 49-60111 is its aerodynamic design. The component features optimized geometries that facilitate improved airflow, contributing to higher combustion efficiency. This design not only boosts performance but also contributes to lower emissions, aligning with modern regulatory requirements and environmental standards.

In terms of maintenance, the GE 49-60111 is engineered for ease of serviceability. Its design allows for straightforward inspection and replacement, minimizing downtime and maintenance costs for operators. This focus on maintenance efficiency is particularly valuable in industrial settings where operational reliability is paramount.

The GE 49-60111 also epitomizes the integration of digital technologies in modern gas turbine systems. Advanced sensors and monitoring systems are often incorporated to provide real-time data on component performance. This data-driven approach allows operators to predict maintenance needs, optimize performance, and extend the lifecycle of the turbine.

Overall, the GE 49-60111, 162D9625P005, stands as a testament to General Electric's innovation in gas turbine technology. With its combination of durability, efficiency, aerodynamic design, and advanced maintenance features, it serves as a critical component in the pursuit of enhanced power generation capabilities while navigating the challenges of modern energy demands.
Top Page Image Contents