Inserting the door panels.

Install the Freezer Door Side Trim

Do not remove the protective film on the outside of the Side Trim until the Side Trim is installed.

Fit the top of the freezer door Side Trim under the corner of the Top Trim and fit the bottom of the Side Trim over the Bottom Trim as illustrated. Attach the Side Trim to the door using the two screws removed in Step 2. Make sure the Side trim is fitting correctly and that you are satisfied with the appearance of all parts before pulling the blue tape liner.

Holding the trim in place with one hand, gradually pull the blue tape liner out, perpendicular to the trim. Pull about 3″ (80 mm) out at a time, pressing the trim with your hand as the adhesive is exposed.

Install the Refrigerator Door Side Trim

Fit the Side Trim over the ends of the refrigerator door Top and Bottom Trim as illustrated. Attach the Side Trim to the door using the two screws removed in Step 2. Make sure the Side Trim is fitting correctly and that you are satisfied with the appearance of all parts before pulling the two pieces of blue tape liner.

Pull the top blue tape liner up about 3″ (80 mm), pressing the trim with your hand as the adhesive is exposed to the door. Then pull the bottom blue tape liner down about 3″ (80 mm). Follow the tape with your hand, pressing the trim adhesive against the door.

Continue pulling the blue tape liner loose, alternating between the top and bottom and pressing the Side Trim against the door.

Consumer Support TroubleshootingTips Installation Instructions OperatingInstructions SafetyInstructions

Remove the Protective Film From the Outside of the Side Trim

16

Page 16
Image 16
GE 49-60111, 162D9625P005 Install the Freezer Door Side Trim, Install the Refrigerator Door Side Trim

162D9625P005, 49-60111 specifications

The GE 49-60111, also known as 162D9625P005, is a highly regarded component within the realm of gas turbine engines, specifically engineered for applications in industrial and aerospace sectors. This product exemplifies General Electric's commitment to advancing power generation technologies with outstanding performance, efficiency, and reliability.

One of the main features of the GE 49-60111 is its robust construction, designed to withstand high temperatures and pressures often encountered in gas turbine operations. The component plays a crucial role in enhancing the overall thermal efficiency of the engine, which is a critical factor in fuel consumption and environmental impact.

The technology behind the GE 49-60111 integrates advanced materials and manufacturing techniques. This includes the use of high-performance alloys that provide enhanced durability while minimizing weight. The component is designed to maintain structural integrity under extreme operational conditions, which is vital for sustaining the engine's longevity and ensuring safety.

Another notable characteristic of the GE 49-60111 is its aerodynamic design. The component features optimized geometries that facilitate improved airflow, contributing to higher combustion efficiency. This design not only boosts performance but also contributes to lower emissions, aligning with modern regulatory requirements and environmental standards.

In terms of maintenance, the GE 49-60111 is engineered for ease of serviceability. Its design allows for straightforward inspection and replacement, minimizing downtime and maintenance costs for operators. This focus on maintenance efficiency is particularly valuable in industrial settings where operational reliability is paramount.

The GE 49-60111 also epitomizes the integration of digital technologies in modern gas turbine systems. Advanced sensors and monitoring systems are often incorporated to provide real-time data on component performance. This data-driven approach allows operators to predict maintenance needs, optimize performance, and extend the lifecycle of the turbine.

Overall, the GE 49-60111, 162D9625P005, stands as a testament to General Electric's innovation in gas turbine technology. With its combination of durability, efficiency, aerodynamic design, and advanced maintenance features, it serves as a critical component in the pursuit of enhanced power generation capabilities while navigating the challenges of modern energy demands.