Oven Control Settings

5

AUTO SELF CLEAN

Press this pad to select the self-cleaning function. See

the Using the self-cleaning oven section.

NOTE: Do not lock the oven door with the latch during cooking. The latch is used for self-cleaning only.

6

BROIL HI/LO Pad

Press this pad to select the broil function.

7

BAKE Pad

Press this pad to select the bake function.

8

+ and – Pads

These pads allow you to set times up to 9 hours

 

and 55 minutes. Short taps to these pads change

 

the time or temperature by small amounts. Press

 

and hold the pad to change the time or temperature

 

by larger amounts.

9

Display

Shows the time of day, oven temperature, whether the

 

oven is in the bake, broil or self-cleaning mode and the

 

times set for the timer on automatic oven operations.

10

CLEAR/OFF Pad

Press this pad to cancel ALL oven operations except the

clock and timer.

If “F–and a number” flash in the display and the oven control signals, this indicates a function error code. If the function error code appears during the self-cleaning function check the oven door latch—the latch handle may have been moved, even if only slightly, from the latched position.

Make sure the handle is to the right as far as it will go. Press the CLEAR/OFF pad. Allow the oven to cool for one hour. If the function error code repeats, disconnect the power to the range and call for service.

Safety Information Operating Instructions Installation Instructions Troubleshooting Tips Customer Service

17

Page 17
Image 17
GE 164D3333P034, 49-8780 manual Oven Control Settings, Using the self-cleaning oven section