Installation Instructions
INSTALLING A J-MODEL IN AN EXISTING WALL CASE
Read these instructions completely and carefully.
1 REMOVE LOCKING PLATE ON |
FRONT LEFT SIDE |
Locking |
plate |
Remove |
screw |
2REMOVE THREE SHIPPING PADS INSIDE AIR CONDITIONER NEXT TO COMPRESSOR
Remove shipping pads
4REINSTALL LOCKING PLATE WITH TAB BEHIND WALL CASE FLANGE. TIGHTEN SCREW
5ATTACH POWER CORD TO BASE PAN WITH CLAMP
Base pan
Power cord
Clamp
6WHEN WALL OUTLET IS TO LEFT, EXTEND CORD UNDER UNIT AND HOLD IT IN PLACE WITH CLAMP
Power
Clamp cord
3
CAREFULLY SLIDE AIR CONDITIONER BACK INTO CASE
Make sure that the tubing on the unit does not touch the wall case and that the case installation is secure.
7
ATTACH FRONT GRILLE
An opening for the power cord is on the bottom of the front grille.
14
