GE ACB AJCS 09 Air Conditioner Controls, Remote Control, Instructions, Consumer, On/Stop

Instructions

About the controls on the air conditioner—models with touch pads.

Appearance may vary.

and Cleaning Operating Instructions Safety

Cool

	Fan
Timer	High
On	Med

Low

TimerSleep On

Off

Air Conditioner Controls

Lights beside the touch pads on the air conditioner

control panel indicate the selected settings.

Controls

Remote Control

When the air conditioner is turned on, it will automatically start in the setting last used.

Support Troubleshooting Tips Installation Instructions Care

ON/STOP

Turns air conditioner on and off.

Display

MODE

On the remote control, use to set the air conditioner to COOL or FAN mode.

On the air conditioner controls, use to set COOL or FAN mode at HIGH, MED or LOW fan speed. Indicator lights on the air conditioner controls will show the mode and fan speed selected.

TEMP Increase ▲ /Decrease ▼ Pads

Use to set temperature when in COOL mode.

Fan Speeds (Remote control only)

Use to set the fan speed at LOW, MED or HIGH.

TIMER

ON—When the air conditioner is off, it can be set to automatically turn on in half an hour to 24 hours at its previous setting. Each touch will set the time in half hours up to 10 and then in hours up to 24.

To cancel (CL) the On Timer press the ON pad again.

OFF—When the air conditioner is on, it can be set to automatically turn off in half an hour to 24 hours. Each touch will set the time in half hours up to 10 and then in hours up to 24.

To cancel (CL) the Off Timer press the OFF pad again.

To cancel the timer, press the ON or OFF pads until the display time disappears.

SLEEP

Press to set the air conditioner to run for 8 hours before it automatically returns to the previous setting.

When the sleep timer is set, the set temperature will automatically increase 2°F after the second hour then 1°F each hour over the next two hours.

To cancel the sleep mode, press the MODE pad or the SLEEP pad a second time.

Remote Control Signal Receiver

Consumer

	Remote Control
	■ To ensure proper operation, aim the
	remote control at the signal receiver
	on the air conditioner.
4	■ The remote control signal has a range of
	up to 21 feet.

■Make sure nothing is between the air conditioner and the remote control that could block the signal.

■Make sure batteries are fresh and installed correctly—see the Care and Cleaning section.