Installation Instructions
9INSTALL SUPPORT BRACKET AND FOAM TOP WINDOW GASKET
A | CAUTION: |
|
| To prevent broken glass | Vinyl |
| or damage to windows, |
|
| on vinyl or other |
|
| similarly constructed |
|
| windows, attach the |
|
| support bracket to the |
|
| window side jam. |
|
| Attach the support | Wood |
| bracket with one |
|
| Type C screw. |
|
BCut the foam top window gasket to the window width.
C Stuff the foam between the glass and the
window to prevent air and
insects from getting into the room.
NOTE: If the gasket supplied does not fit your window, obtain appropriate material locally to provide a proper installation seal.
10INSTALL THE AIR CONDITIONER IN THE CASE
ASlide the air conditioner into the case by the base pan. Do not push on the controls, styrofoam air discharge housing or the finned coils. Make sure the air conditioner is firmly seated.
Do not press on these areas— damage to the unit may result
Base Pan
10INSTALL THE AIR CONDITIONER IN THE CASE (CONT.)
BReplace the 2 ground screws removed earlier, one on each side of the case.
IMPORTANT: The ground screws must be reinstalled to ensure a proper ground.
CAttach the front grille to the case by inserting the tabs on the grille into the slots on the front top of the case. Push the grille in.
DSecure the front grille to the case by replacing the 2 screws removed earlier. Press on the top of the grille to help with side screw installation.
EConnect power.
12
