Installation Instructions

Air Conditioner

Questions? Call 800.GE.CARES (800.432.2737) or visit our Website at: ge.com In Canada, call 1.800.561.3344 or visit www.GEAppliances.ca

BEFORE YOU BEGIN

Read these instructions completely and carefully.

•IMPORTANT — Save these

instructions for local inspector’s use.

•IMPORTANT — Observe all governing codes and ordinances.

•Note to Installer – Be sure to leave these instructions with the Consumer.

•Note to Consumer – Keep these instructions for future reference.

•Skill level – Installation of this appliance requires basic mechanical skills.

•Completion time – Approximately 1 hour

•We recommend that two people install this product.

•Proper installation is the responsibility of the installer.

•Product failure due to improper installation is not covered under the Warranty.

•You MUST use all supplied parts and use proper installation procedures as described in these instructions, and any separate kit instructions, when installing this air conditioner.

ELECTRICAL REQUIREMENTS

Some models require a 115/120-volt AC, 60 Hz grounded outlet protected with a

15-amp time delay fuse or circuit breaker.

The 3-prong grounding plug minimizes the possibility of electric shock hazard. If the wall outlet you plan to use is only a 2-prong outlet, it is your responsibility to have it replaced with a properly grounded 3-prong wall outlet.

Some models require 230/208-volt AC, protected with a time delay fuse or circuit breaker. These models should be installed on their own single branch circuit for best performance and to prevent overloading house or apartment wiring circuits, which could cause a possible fire hazard from overheating wires.

CAUTION:

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord.

Do not change the plug on the power cord of this air conditioner.

Aluminum house wiring may present special problems—consult a qualified electrician.

If the sill support bolts do not contact the window sill, or if you have a window without a sill, you must order accessory kit RAK87 to properly install this air conditioner. Call 800.626.2002 or visit ge.com.

TOOLS YOU WILL NEED

Phillips head screwdriver

 

 

Adjustable wrench

Flat-blade screwdriver

 

Pencil

Ruler or tape measure

 

Level

Scissors or knife

Power cord includes a current interrupter device. A test and reset button is provided on the plug case. The device should be tested on a periodic basis by first pressing the TEST button and then the RESET button while plugged into the outlet. If the TEST button does not trip or if the RESET button will not stay engaged, discontinue use of the air conditioner and contact a qualified service technician.

7

Page 6 Page 8
Page 7
Image 7
GE AEM10 owner manual Before YOU Begin, Electrical Requirements, Tools YOU will Need
Page 6 Page 8

AEM10 specifications

The GE AEM10 is a modern mobile generator that exemplifies the innovation and reliability that General Electric brings to the power generation industry. This generator is designed to meet the demands of various applications, including construction sites, emergency power supply, and outdoor events. Its advanced features and technologies set it apart from traditional generators, making it a popular choice among users seeking efficient and dependable energy solutions.

One of the main features of the GE AEM10 is its compact design, which allows for easy transportation and placement in diverse environments. Weighing significantly less than many comparable models, it can be easily moved by a small crew and set up quickly, reducing downtime and increasing productivity on job sites. The generator's rugged build and weather-resistant enclosures ensure it can withstand harsh conditions, making it suitable for both indoor and outdoor use.

Equipped with a powerful and fuel-efficient engine, the AEM10 offers reliable power output without compromising on performance. It features a user-friendly control panel that displays critical information in real-time, including power output, fuel level, and run time. This transparency allows operators to manage their energy consumption effectively and avoid unnecessary interruptions.

In terms of technology, the GE AEM10 incorporates cutting-edge digital monitoring systems that enhance operational safety and efficiency. The inclusion of advanced automatic voltage regulation ensures stable and clean power delivery, protecting sensitive equipment from voltage fluctuations. Furthermore, the generator's low emissions design aligns with global standards for environmental safety, reducing its ecological footprint.

Another notable characteristic of the AEM10 is its adaptive load management capability, which allows it to adjust power output based on real-time demand. This feature not only optimizes fuel usage but also extends the life of the generator, minimizing wear and tear during operation.

In summary, the GE AEM10 is a state-of-the-art mobile generator that combines portability, reliability, and advanced technology. Its compact design, powerful performance, and innovative features make it an ideal choice for a wide range of applications, ensuring that users can count on it for both everyday and emergency power needs. Whether for commercial, industrial, or recreational use, the AEM10 stands out as a leader in the mobile generator market.
Top Page Image Contents