Safety Instructions

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

For your safety, the information in this manual must be followed to minimize the risk of fire, electric shock or personal injury.

SAFETY PRECAUTIONS

Operating Instructions

 

Care and Cleaning

■Use this appliance only for its intended purpose as described in this Owner’s Manual.

■This air conditioner must be properly installed in accordance with the Installation Instructions before it is used.

■Never unplug your air conditioner by pulling on the power cord. Always grip plug firmly and pull straight out from the receptacle.

■Replace immediately all electric service cords that have become frayed or otherwise damaged. A damaged power supply cord must be replaced with a new power supply cord obtained from the manufacturer and not repaired. Do not use a cord that shows cracks or abrasion damage along its length or at either the plug or connector end.

■Turn the unit OFF and unplug your air conditioner before making any repairs or cleaning.

NOTE: We strongly recommend that any servicing be performed by a qualified individual.

■For your safety…do not store or use combustible materials, gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance.

■All air conditioners contain refrigerants, which under federal law must be removed prior to product disposal. If you are getting rid of an old product with refrigerants, check with the company handling disposal about what to do.

■If the receptacle does not match the plug, the receptacle must be changed out by a qualified electrician.

HOW TO CONNECT ELECTRICITY

Tips

Consumer Support

Troubleshooting

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. For personal safety, this appliance must be properly grounded.

DO NOT use an adapter plug with this appliance.

The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the possibility of electric shock hazard from this appliance.

Power cord includes a current interrupter device. A test and reset button is provided on the plug case. The device should be tested on a periodic basis by first pressing the TEST button and then the RESET button while plugged into the outlet. If the TEST button does not trip

or if the RESET button will not stay engaged, discontinue use of the air conditioner and contact a qualified service technician.

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

Where a 2-prong wall outlet is encountered,

it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

The air conditioner should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate.

This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires.

See the Installation Instructions, Electrical Requirements section for specific electrical connection requirements.

2

Page 1 Page 3
Page 2
Image 2
GE AEM10 owner manual Tips Consumer Support, Do not use an adapter plug with this appliance
Page 1 Page 3

AEM10 specifications

The GE AEM10 is a modern mobile generator that exemplifies the innovation and reliability that General Electric brings to the power generation industry. This generator is designed to meet the demands of various applications, including construction sites, emergency power supply, and outdoor events. Its advanced features and technologies set it apart from traditional generators, making it a popular choice among users seeking efficient and dependable energy solutions.

One of the main features of the GE AEM10 is its compact design, which allows for easy transportation and placement in diverse environments. Weighing significantly less than many comparable models, it can be easily moved by a small crew and set up quickly, reducing downtime and increasing productivity on job sites. The generator's rugged build and weather-resistant enclosures ensure it can withstand harsh conditions, making it suitable for both indoor and outdoor use.

Equipped with a powerful and fuel-efficient engine, the AEM10 offers reliable power output without compromising on performance. It features a user-friendly control panel that displays critical information in real-time, including power output, fuel level, and run time. This transparency allows operators to manage their energy consumption effectively and avoid unnecessary interruptions.

In terms of technology, the GE AEM10 incorporates cutting-edge digital monitoring systems that enhance operational safety and efficiency. The inclusion of advanced automatic voltage regulation ensures stable and clean power delivery, protecting sensitive equipment from voltage fluctuations. Furthermore, the generator's low emissions design aligns with global standards for environmental safety, reducing its ecological footprint.

Another notable characteristic of the AEM10 is its adaptive load management capability, which allows it to adjust power output based on real-time demand. This feature not only optimizes fuel usage but also extends the life of the generator, minimizing wear and tear during operation.

In summary, the GE AEM10 is a state-of-the-art mobile generator that combines portability, reliability, and advanced technology. Its compact design, powerful performance, and innovative features make it an ideal choice for a wide range of applications, ensuring that users can count on it for both everyday and emergency power needs. Whether for commercial, industrial, or recreational use, the AEM10 stands out as a leader in the mobile generator market.
Top Page Image Contents