— Observe all

InstallationAir Conditioner Instructions

Questions? Call 800.GE.CARES (800.432.2737) or visit our Website at: GEAppliances.com In Canada, call 1.800.561.3344 or visit www.GEAppliances.ca

BEFORE YOU BEGIN

Read these instructions completely and carefully.

IMPORTANT — Save these

instructions for local inspector’s use.

IMPORTANT

governing codes and ordinances.

Note to Installer – Be sure to leave these instructions with the Consumer.

Note to Consumer – Keep these instructions for future reference.

Skill level – Installation of this appliance requires basic mechanical skills .

Completion time – Approximately 1 hour

• We recommend that two people install this product.

• Proper installation is the responsibility of the installer .

• Product failure due to improper installation is not covered under the Warranty .

• You MUST use all supplied parts and use proper installation procedures as described in these instructions when installing this air conditioner .

ELECTRICAL REQUIREMENTS

Some models require a 115/120-volt AC, 60-Hz grounded outlet protected with a 15-amp time-delay fuse or circuit breaker.

The 3-prong grounding plug minimizes the possibility of electric shock hazard. If the wall outlet you plan to use is only a 2-prong outlet, it is your responsibility to have it replaced with a properly grounded 3-prong wall outlet.

Some models require 230/208-volt AC, protected with a time-delay fuse or circuit breaker. These models should be installed on their own single branch circuit for best performance and to prevent overloading house or apartment wiring circuits, which could cause a possible fire hazard from overheating wires.

7

CAUTION:

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord.

Do not change the plug on the power cord of this air conditioner.

Aluminum house wiring may present special problems—consult a qualified electrician.

TOOLS YOU WILL NEED

Phillips-head screwdriver

Flat-blade screwdriver

 

 

 

Pencil

Ruler or tape measure

 

 

 

 

 

 

Level

 

Scissors or knife

 

 

 

 

 

 

Power cord includes a current interrupter device. A test and reset button is provided on the plug case. The device should be tested on a periodic basis by first pressing the TEST button and then the RESET button while plugged into the outlet. If the TEST button does not trip or if the RESET button will not stay engaged, discontinue use of the air conditioner and contact a qualified service technician.

Page 7
Image 7
GE AED12*, AEQ10, AEQ12, AED10* installation instructions Before YOU Begin, Electrical Requirements, Tools YOU will Need

AED12*, AED10*, AEQ12, AEQ10 specifications

The GE AED10*, AED12*, AEQ12, and AEQ10 are sophisticated automated external defibrillators (AEDs) designed to deliver lifesaving treatment during cardiac emergencies. Recognized for their reliability and user-friendly features, these devices are critical tools in promoting cardiac health and enhancing survival rates in cases of sudden cardiac arrest.

One of the standout features of the GE AED series is their intuitive design. The AED10* and AED12* models come equipped with visual and auditory prompts, guiding bystanders through each step of the defibrillation process. This maximizes the likelihood of effective use by untrained individuals, promoting earlier intervention which is vital for survival.

Both the AED10* and AED12* feature a semi-automatic mode, which allows for both automated analysis of the patient’s heart rhythm and manual shock delivery. This flexibility caters to both caregiver preferences and the requirements of the specific emergency situation. The AED12*, in particular, is notable for its advanced capabilities, including real-time ECG monitoring and a built-in memory that stores the event data for later review, enabling healthcare professionals to analyze the situation and fine-tune future emergency responses.

The AEQ12 and AEQ10 also incorporate advanced algorithms that enhance rhythm detection accuracy, ensuring appropriate shocks are delivered only when necessary. These units boast a robust battery life, ensuring they remain functional and ready for use when needed. Their compact and lightweight design makes them portable, enabling quick access in emergencies, whether located in public venues or within private organizations.

In terms of connectivity, both the AEQ12 and AEQ10 support rescue data transmission, allowing incident details to be sent to medical professionals in real time. This feature facilitates a faster response once emergency personnel arrive at the scene, optimizing treatment procedures.

The AED series also emphasizes ruggedness and durability, with many models being resistant to dust and moisture, adhering to high environmental standards. This reliability is crucial, especially in varied locations where the AED may be deployed.

In conclusion, the GE AED10*, AED12*, AEQ12, and AEQ10 are pivotal in emergency care, combining advanced technology, ease of use, and portability. They empower ordinary citizens to act quickly in crises where every second counts, through features that demystify the defibrillation process. As cardiac emergencies can occur anywhere at any time, having these AEDs on hand can significantly improve outcomes during such critical moments.