Installation Instructions
| WINDOW REQUIREMENTS |
| PREPARE THE AIR CONDITIONER |
1 |
|
•These instructions are for a standard
•The air conditioner can be installed without the accordion panels if needed to fit in a narrow window . See the window opening dimensions .
•All supporting parts must be secured to firm wood, masonry or metal .
•The electrical outlet must be within reach of the power cord .
AHold the accordion panel in one hand and gently pull back to free the open end .
15 ½” min.
22″ to 36″
(With accordion panels)
BSlide the free end of the accordion panel into the side panel rails . Slide the panel down . Be sure to leave enough space to slip the top and bottom of the frame into the rails on the cabinet .
NOTE: There is a right and a left accordion panel . Be sure to use the proper panel for each side .
2STORM WINDOW REQUIREMENTS
A storm window frame will not allow the air conditioner to tilt toward the outside, and will keep it from draining properly .
To adjust for this, attach a piece of wood to the sill .
WOOD PIECES
WIDTH: 2”
LENGTH: Long enough to fit inside the window frame .
THICKNESS: To determine the thickness, place a piece of wood on the sill to make it 1/2” higher than the top of the storm window frame or the vinyl frame .
Attach securely with nails or screws provided by the installer .
CSlide the left and right accordion panels into the top and bottom mounting rails .
Top left | Top mounting rail Top right |
|
1/2″ higher than storm window frame
Storm window frame
1/2″ higher than vinyl frame
(on some windows)
Wood
Sill
Vinyl frame
Bottom mounting rail
9