GE AEQ10, AEQ12 About the controls on the air conditioner, Controls, Instructions, Remote Control

Instructions

About the controls on the air conditioner.

Features and appearance will vary.

Lights next to the touch pads on the air conditioner control panel indicate the selected settings.

Operating Instructions Safety

NOTE: The display always	Light indicates the unit
shows the room temperature	is in the temperature or
except when setting the Set	delay time Set mode.
temperature or the Delay timer.

Light indicates the delay timer is set.

Delay 1–24hr
Delay timer			Delay timer Increase
Decrease
Mode select			Auto Fan on
Fan speed	Fan	Fan	Fan speed Increase
Decrease
Temperature			Unit power on/off
set Increase
and Decrease

Support Troubleshooting Tips Installation Instructions Care and Cleaning

Air Conditioner Controls

Controls

Power Pad

Turns air conditioner on and off. When turned on, the display will show the room temperature.

Display

Shows the room temperature or time remaining on the Delay timer. Shows the Set temperature while setting the temperature in Cool or Energy Saver modes. The Set light will turn on while setting.

Temp Increase ▲ /Decrease ▼ Pads

Use to set temperature when in Cool or Energy Saver mode. The Set light will turn on while setting.

Delay Timer Increase▲ (+) /Decrease ▼(–)

Pads

Each touch of the Increase ▲ / Decrease ▼ pads on the unit or the Increase + / Decrease – pads on the remote control will set the delay time when using the Delay 1–24hrtimer ( ). The Set light will turn on while setting.

Fan Speed Pads

Use to set the fan speed to Low, Med, High or Auto on the unit. NOTE: On the remote control, use the fan speed Increase + / Decrease – pads to set the fan speeds to Low, Med or High. Use the Auto pad to turn Auto fan on.

Remote Control

Mode Pad

Use to set the air conditioner to Cool, Energy Saver or Fan Only mode.

Delay Pads

Delay ON—When the air conditioner is off, it can be set to automatically come on in 1 to 24 hours at its previous mode and fan settings.

Delay OFF—When the air conditioner is on, it can be set to automatically turn off in 1 to

24hours.

How to set:

Press the Delay 1–24hrpad on the unit or the

pad on the remote control. Each touch of the Increase ▲ / Decrease▼pads on the unit or the Increase + / Decrease – pads on

the remote control will set the timer in

1-hour intervals. The Set light will turn on while setting.

To review the remaining time on the Delay 1–24hrtimer, press the Delay 1–24hrpad on the unit or the pad on the remote control. Use the Increase ▲ / Decrease ▼ pads on the unit or the Increase + / Decrease – pads on the remote control to set a new time if desired.

To cancel the timer, press the Delay 1–24hr pad until the light on the Delay 1–24hr pad goes off.

Consumer

Power Outage Recovery Feature

	In the case of a power outage or interruption, the	feature was set, it will resume countdown. You may
4	unit will automatically re-start in the settings last	need to set a new time if desired.
	used after the power is restored. If the Delay 1–24hr