GE JNM1951, DVM1950, JVM1950 manual Save These Instructions, Precautions To Avoid Possible Exposure

Models: JNM1951 JVM1950 DVM1950

1 68
Download 68 pages 19.95 Kb
Page 2
Image 2
or exposure to excessive microwave energy:

IMPORTANT SAFETYINSTRUCTIONS. READ ALL INSTRUCTIONS BEFOREUSING.

When using electrical appliances basic safety precautions should be followed, including the following:

WARNING!

To reduce the risk of burns, electric shock, fire, injury to persons

or exposure to excessive microwave energy:

PRECAUTIONS TO AVOID POSSIBLE EXPOSURE

TO EXCESSIVE MICROWAVE ENERGY

(a)Do Not Attempt to operate this oven with the door open since open- door operation can result in harmful exposure to microwave energy. It is important not to defeat or tamper with the safety interlocks.

(b)Do Not Place any object between the oven front face and the door or allow soil or cleaner residue to

accumulate on sealing surfaces.

(cl Do Not Operate the oven if it is damaged. It is particularly important that the oven door close properly and that there is no damage to the:

(Z)door (bent)

(2)hinges and latches (brokenor loosened)

(:3)door seals and sealing surfaces.

_d) The Oven Should Not be adjusted or repaired by anyone except properly qualified service personnel.

Reed oll instructions before using this appliance. When using electrical

appliances, basic safety precautions should be followed, including the following:

Read and follow the specific precautions in the Precautions to Avoid PossibleExposure

to ExcessiveMicrowave Energy section above.

Thisappliance must be grounded. Connect only to a properly grounded outlet. Seethe

Grounding Instructions section on page 6.

Thismicrowave oven is ULlisted for

installation over both gas (lessthan 60,000BTU)and electric ranges.

Thisover-the-range oven is designed for use over ranges no wider than 36." It may be

installed over both gas and electric cooking equipment.

Do not operate this appliance if it has a damaged power cord or plug, if it is not

working properly, or if it has been damaged or dropped. If the power cord is damaged, it must be replaced by General Electric Service

or an authorized service agent using a power cord (_v(_ilablefrom General Electric..

Install or locate this appliance only in accordance with the provided installation instructions.

Do not clean with metal scouring pads.

Pieces can burn offthe pad and touch electrical parts involving risk of electric shock.

2 SAVE THESE INSTRUCTIONS

Page 2
Image 2
GE JNM1951, DVM1950, JVM1950 Save These Instructions, Precautions To Avoid Possible Exposure, To Excessive Microwave Energy