GE GNSF48A01, GNSF39A01 14″ 3 7⁄8″ IN-OUT 18″ 47″ or 59″, 38 1⁄ 2 ″ or 50 1⁄ 2 ″, 38 ″

Specifications/Dimensions—See rating decal, located on the Water Softening System.

Rated Capacity*

Amount of high capacity resin (lbs/cu. ft)

Resin tank nominal size (in., dia. x height)

Service flow rate (gpm) (see rating label on softener)

Water supply maximum hardness (gpg)

Water supply maximum clear water iron (ppm)** Water pressure limits (min.-max. psi)

Pressure drop at rated service flow (psig)

Water temperature maximum (°F)

Water supply minimum flow rate (gpm)

Regeneration cycle flow rates (gpm)

Fill (flow to brine tank)

Brining	{
Brine Rinse
		(flow to drain)
Backwash
Fast Rinse

GNSF39A	GNSF48A
54.6/1.05	67.6/1.30
10″ x 35″	10″ x 47″
12	12
110	110
8	8
20-125	20-125
15	15
120	120
3	3
.3	.3
.16	.16
.12	.12
2.0	2.0
2.0	2.0

This system conforms to WQA S-100-98 for specific capacity claims as verified and substantiated by test data.

*Testing was performed using pellet grade sodium chloride as the regenerant salt.

**Extent of iron removal may vary with conditions. Use of Diamond Crystal® Red•Out® or Super Iron Out® will improve iron removal. Refer to Cleaning iron out of the Water Softening System section.

14″

3 7⁄8″

IN-OUT

18″

47″ or 59″

38″ 38 1⁄2″ or 50 1⁄2″

11″

11