GE GTL21 About the shelves and bins, Rearranging the Shelves, Half-Width Shelves, To remove

Consumer Support Troubleshooting Tips Installation Instructions Operating Instructions Safety Instructions

About the shelves and bins.

Not all features are on all models.

Rearranging the Shelves

Shelves in the refrigerator and freezer compartments are adjustable.

Refrigerator Compartment

Half-Width Shelves

One end of the shelf rests on a molded side-wall support; a bracket on the other end hooks into a track on the rear cabinet wall.

To remove:

Lift up	Tilt the shelf up at the front.
and out	Lift the support off and out of the track.

Tilt up

To replace:

While tilting the shelf up, insert the top hook at the back of the shelf in a slot on the track.

Lower the front of the shelf until the bottom of the shelf locks into place.

NOTE: The shelf to the right of the track is designed to hook into the right-hand slot; the shelf to the left is designed to hook into the left-hand slot.

Freezer Compartment

To remove:

Lift up the left side of the shelf and slide it left into the center of the shelf supports.

Rotate the right side of the shelf up and out of the shelf supports.

To replace:

Holding the shelf diagonally, insert the left end of the shelf into the center of the shelf supports on the side wall.

Insert the right end of the shelf into the shelf supports on the side wall. Rest each end of the shelf on the bottom of the shelf supports.

6