GE GXSF27B GNSF35Z GXSF39B installation instructions Typical Installation Illustration

Installation instructions.

Typical Installation Illustration

	MAIN
	WATER
Soft water	PIPE

120-volt outlet

Hard water

Hard water to outside faucets

24V transformer

Salt hole cover removed

SALT

GOES HERE

Brinewell

Union (not supplied) (2)

Installation nut (2)

Copper tube, 3/4″ (2)

Washer (2)

INLET

NOTE: See Drain Hose

Connections section.

Bypass Valve

•Pull out for soft water service

•Push in for bypass

NOTE: Threads on the bypass valve are 1″ male pipe. If 1″ pipes are needed, do not use the copper tubes and nuts included. Buy 1″ pipe thread female adapter, and plumb directly to 1″ threads.

Fig. 1

CROSS-OVER

Use if water supply flows from the left.

Include single or 3-valve bypass.

Hard water

Soft water

From softener

outletTo softener inlet

Optional 3-Valve Bypass Installation Illustration

Adapters for this installation are not supplied with the softener.

To order these adapters, call GE Parts 800-626-2000. (Ask for Part # WS60X10006.)

Soft water

Bypass valve	Hard water to
	outside faucets

120-volt outlet

MAIN
WATER	Hard water
PIPE

	Inlet valve
Outlet valve

Fig. 2

Hard water

Soft water

24V transformer

Nut (2)

Copper

tube,

3/4″ (2) Washer (2)

3-valve bypass system

For soft water service:

•Open the inlet and outlet valves

•Close the bypass valve For bypass hard water:

•Close the inlet and outlet valves

•Open the bypass valve

From softener

outlet

To softener inlet

CROSS-OVER

Use if water supply flows from

the left. Include single or

3-valve bypass.

6

Installation adapter (2) (see above)

	NOTE: Threads on the installation adapters are 1″
INLET
	male pipe. If 1″ pipes are needed, do not use the
	copper tubes and nuts included. Buy 1″ pipe thread
	female adapter and plumb directly to 1″ threads on
	installation adapters.