GE JB940 How to Delay the Start of Cleaning, After a Clean Cycle, Using the self-cleaning oven

Customer Service Troubleshooting Tips Installation Instructions Operating Instructions Safety Information

Using the self-cleaning oven.

How to Delay the Start of Cleaning

	Latch the door.
1
	Press the SELF CLEAN pad.
2
	Using the number pads, enter the desired
3
	clean time.
	Press the DELAY START pad. The earliest start time
4
	you can set will appear in the display.
	Using the number pads, enter the time of day you
5
	want the clean cycle to start.

6 Press the START pad.

The self-clean cycle will automatically begin after CLEAN is displayed and the time for the clean cycle is reached. The words ON and LOCKED DOOR will appear in the display. It will not be possible to open the oven door until the temperature drops below the lock temperature and the LOCKED DOOR light goes off.

When the LOCKED DOOR light is off, slide the latch handle to the left as far as it will go and open the door.

After a Clean Cycle

You may notice some white ash in the oven. Wipe it up with a damp cloth after the oven cools.

If white spots remain, remove them with a soap-filled steel wool pad and rinse thoroughly with a vinegar and water mixture.

These deposits are usually a salt residue that cannot be removed by the clean cycle.

If the oven is not clean after one clean cycle, repeat the cycle.

■You cannot set the oven for cooking until the oven is cool enough for the door to be unlatched.

■While the oven is self-cleaning, you can press the CLOCK pad to display the time of day. To return to the clean countdown, press the COOKING TIME pad.

■If the shelves become hard to slide, wipe the shelf supports with cooking oil.

40