GE JB940 Oven Heating Elements, Oven Light Replacement, the main fuse or circuit breaker panel

Oven Heating Elements

Do not clean the bake element or the broil element.

Any soil will burn off when the elements are heated.

To clean the oven floor, gently lift the bake element.

Clean with warm soapy water.

Roasting rack	Oven Shelves and Convection Roasting Rack
	Clean the oven shelves (including the offset shelf) and
Oven shelf	the convection roasting rack with an abrasive cleanser or
	steel wool. After cleaning, rinse the shelves and rack
	with clean water and dry with a clean cloth.
Offset shelf	NOTE: The oven shelves and convection roasting rack may be
	cleaned in the self-cleaning oven, however, the shelves will darken
	in color, lose their luster and become hard to slide if cleaned during
	the self-cleaning cycle. You can wipe the shelf supports with
	cooking oil after self-cleaning to make the shelves slide more easily.
	Oven Light Replacement
	CAUTION: Before replacing your oven light bulb,
	disconnect the electrical power to the range at
	the main fuse or circuit breaker panel.
	Be sure to let the light cover and bulb cool completely.
Wire cover holder	To remove the cover:
	1	Hold a hand under the cover so it doesn’t fall when
		released. With fingers of the same hand, firmly push
		back the wire cover holder. Lift off the cover.
		Do not remove any screws to remove the cover.
	2	Replace bulb with a 40-watt household appliance
		bulb.
	To replace the cover:
	1	Place it into groove of the light receptacle. Pull wire
		forward to the center of the cover until it snaps into
		place.
	2	Connect electrical power to the range.

Safety Information Operating Instructions Installation Instructions Troubleshooting Tips Customer Service

43