GE JGBP24GE warranty careandcleaning, Opemting the Self=CIeaningOvencofiti~u~d, cleating cycle

careandcleaning

Opemting the Self=CIeaningOven(cofiti~u~d)

If YouHavetoInterrupt the

cleating cycle

step1:

Turn the STOP dial until the pointer is at the correct time of day.

step 2: (Allmodels)

Slide the door latch leverto the left as far as it will go. If the LOCKED lightis on, you must wait until the light goes off before movingthe latch lever. This will unlock the oven door so it can be opened.

step3:

Turn the OVEN SET knob from CLEAN to OFF.

Importint: Any attempt to Uniockthe door by force while the CLEA~NG light is on can result in damage to the door 1locking mechanism.

Questiom andAwwers

Q.YVhywon’tmy oveB3clean immediate~yeventhough I set the start time correctly?

A.Check to be sure the START time is the same as the time on the range clock. Also check to be sure latch lever is movedto the right as far as it will go and the IOVENSET knob is turned to TIME BAKEor

CLEAN.

Q.If my oven clock is not working, can I still self-clean my oven?

A.No. YourAutomaticOven Timer uses the range clock to help start and stop your self-cleaning cycle.

Q.Can I use commercial oven cleaners on any part of my self-cleaning oven?

A.No cleaners or coatings should be used around any part of this oven. If you do use them and do not wipe the oven absolutely clean, the residue can scar the oven surface and damage metal parts the next time the oven is automatically cleaned.

Q.Can 1 clean the Woven Gasket around the oven door?

A.No, this gasket is essential for

a good oven seal and care must be taken not to rub, damage or move this gasket.

Q. What should I do if excessive smoking occurs during cleaning?

A.This is caused by excessive soil, and you should switch the OVEN SET knob ~E

Open windows to rid room of “ smoke. Allow the oven to cool for at least one hour before opening the door. Wipe up the excess soil and reset the clean cycle.

Q.Is the “crackling”sound I hear during cleaning normal?

A.Yes.This is the souridofthe metal heating and coolingduring both the cookingand cleaning functions,

Q.Should there be any odor during the cleaning?

A, Yes,there maybe a slight.odor during the first few cleanings. Failure to wipe out excessivesoil might also cause a strong odor when cleaning.

Q.What causes the hair-like lines on the enameled surface of my oven?

A.This is a normal condition, resulting from heating and cooling during cleaning. These lines do not affect how your ovenperforms.

Q.Why do 1 have ash left in my oven after cleaning?

A. Some types of’soil will leave

a deposit which is ash. It can be removed with a damp sponge or cloth.

Q. My oven shelves do not slide easily. What is the matter?

A, After many cleanings, oven shelves may become so clean they do not slide easily. If you wish shelves to slide more easily, dampen fingers with a small amount of cooking oil and rub lightly over sides of shelf where they contact shelf supports.

Q. My oven shelves have become gray after the self-clean cycle. Is this normal?

A.Yes. After the self-clean cycle, the shelves may discolor and lose some of their original luster.