![](/images/new-backgrounds/1090431/9043175x1.webp)
ELECTRl~L CONNECTIONS (continued) | ❑ usage Sitiationswhere &pliance | ||||
❑ USage sitiationSwhereAppliace | Power Cord W be Disconnetid Frquen@. | ||||
Do not use an adapter plug in these situations | |||||
Power Cord W be Disconnected Mquen@. | because disconnecting of the power cord | ||||
An adapter maybe used only on a l~amp | |||||
places undue strain on the adapter and leads to | |||||
circuit. Do not use an adapter on a | eventual failure of the adapter ground terminal. | ||||
circuit. mere local codes permit, a | The customer should have the | ||||
TEMPOUY CONNE~ON may be | wall receptacle replaced with a | ||||
made to a properly grounded | @rounding) receptacle by a qualtied electrician | ||||
receptacle by the use of a | before using the appliance. | ||||
available at most hardware stores. The larger | The installation of appliances designed for | ||||
slot in the adapter must be aligned with the | |||||
mobile home installation must conform with | |||||
larger slot in the wall receptacle to provide | |||||
the Manufactured Home Construction and | |||||
proper polarity in the connection of the | |||||
Safety Standard, Title 24 CFR, Part 3280 | |||||
power cord. |
|
| |||
|
| (formerly the Federal Standard for Mobile | |||
|
|
|
| ||
TEMPORARY METHOD |
| Home Construction and Safety, Title 24, HUD, | |||
(ADAPTER PLUGS NOT ,..,. | QB | Part 280) or, when such standard is not | |||
applicable, the Standard for Manufactured | |||||
PERMITTED IN CANADA) | I;lk” | . > | |||
|
| ~1 | Home Installations, latest edition (Manufactured | ||
| ALIGN LARGE | ti~“’ ENSURE PROPER | Home Sites, Communities and | ||
| PRONGS/SLOTS |
| GROUND AND | A225.1, latest edition, or with local codes. In | |
|
|
| FIRM CONNECTION | Canada, mobile home installation must be in | |
|
|
| BEFORE USE | ||
|
|
|
| accordance with the current CAN/CSA | |
|
|
|
| Z240/MH Mobile Home Installation Code. | |
|
|
|
| Electric Disconnect | |
| CA~ON: Attaching the adapter ground | ||||
| 1. hcate disconnect plug on the range back. | ||||
| terminal to the wall receptacle cover screw | ||||
| 2. Pinch sides of connector and pull out of | ||||
| does not ground the appliance unless the cover | ||||
| screw is metal, and not insulated, and the wall | range back. | |||
| receptacle is grounded through the house | You will have one ef these disconnect plugs: | |||
| wiring. The customer should have the circuit | ||||
|
| ||||
| checked by a qualified electrician to make sure |
| |||
| the receptacle is properly grounded. |
| |||
I | ‘“‘: |
men disconnecting the power cord from the adapter, always hold the adapter with one hand. If this is not done, the adapter ground terminal is very likely to break with repeated use. Should this happen, DO NOT USE the appliance until a proper ground has again been established.
38