❑LEVELING THE RANGE

1.Remove the storage drawer, broiler drawer or kick panel.

2.Use a 3/16” open-end or socket wrench to back out both rear leveling legs approximately two turns.

3.Use a l:M” open-end or adjustable wrench to back out the front leveling legs two turns.

4.Install the oven shelves in the oven and position the range where it will be installed.

5.Check for levelness by placing a spirit level or a cup, partially filled with water, on one of the oven racks. If using a spirit level, take two readings—with the level placed diagonally first in one direction and then the other.

6.Adjust the leveling legs until the range is level.

7.After the range is level, slide the range away from the wall so that the Anti-Tip device can be installed.

❑INSTALLING THE ANTI-TIP DEVICE

WARNING:

●Range must be secured with an approved Anti-Tip device.

●Unless properly installed, the range could be tipped by you or a child standing, sitting or leaning on an open door.

●After installing the Anti-Tip device, verify that it is in place by carefully attempting to tilt the range forward.

●This range has been designed to meet all recognized industry tip standards for all normal conditions.

●The use of this device does not preclude tipping of the range when not properly installed.

●If the Anti-Tip device supplied with the range does not fit this application, use the universal Anti-Tip device WB02X7909.

1.Mark the wall where the NGHT EDGE of the range is to be located. Be sure to allow for the countertop overhang if you intend to install the range next to cabinets.

toward the center of the range from the marked edge of the range.

3.Using the device as a template, mark the position of the hole for the screw.

4.For wood construction, drill a pilot hole at an angle of 20 degrees from the horizontal. A nail or awl may be used if a drill is not available.

Mount the Anti-Tip device with the screw provided.

For cement or concrete construction, you will need a 1/4” x 1%” lag bolt and a 1/2” O.D. sleeve anchor, which are not provided. Drill the recommended size hole for the hardware.

Install the sleeve anchor into the drilled hole and then install the lag bolt through the device. The bolts must be properly tightened as recommended for the hardware.

5.Slide the range against the wall, and check for proper installation by grasping the front edges of the rear surface unit openings and carefully attempting to tilt the range forward.

WHEN WL HOOKUPS ARE COMWETE~

ME SUREML ~NTROLSARE LEFT IN THE OFF POSITION.

ME SURE THE FLOW OF @MBUSTION AND VENTIUTION MR TO THE RANGE IS UNOBSTRU~ED.

(continued next page)

41

Page 40 Page 42
Page 41
Image 41
GE JGBP29GES, JGBP33WES, JGBP25GEN, JGBP32AES, JGBP33GES, JGBP29GEN Leveling the Range, Installing the ANTI-TIP Device
Page 40 Page 42

JGBP30AEP, JGBP32WES, JGBP32GES, JGBP30GEP, JGBP29GEN specifications

The GE JGBP33WES, JGBP29GES, JGBP25GEN, JGBP32AES, and JGBP33GES model ranges offer a diverse array of features and technologies designed for modern kitchens. These gas ranges are known for their reliability, ease of use, and innovative designs.

The GE JGBP33WES features a clean and contemporary design in a stainless steel finish, bringing a touch of elegance to any kitchen. This model includes a removable oven door for easy cleaning and features both a conventional and a broil oven. Its electronic ignition system provides a reliable alternative to pilot lights, ensuring safety and convenience.

Similarly, the GE JGBP29GES is designed with user convenience in mind. It features a sealed cooktop with four burners, ensuring that spills and messes are contained for easier cleanup. This model also includes a large oven capacity, accommodating multiple dishes at once, ideal for family gatherings or meal preps. The self-clean feature simplifies maintenance, allowing users to focus more on cooking than on cleanup.

The JGBP25GEN model stands out with its advanced cooking features. It includes a precise simmer burner, perfect for delicate sauces or melting chocolate without scorching. The oven also offers a variable broil option, giving cooks more control over the browning of their dishes. Its durable, alloy construction ensures longevity and ease of maintenance, making it a staple in reliable home cooking.

On the other hand, the GE JGBP32AES introduces additional functionality with its continuous grates and heavy-duty cookware support. This design feature enables easy maneuvering of pots and pans across the cooktop, allowing for efficient multitasking. The range also has a powerful oven with a true convection feature, which promotes even baking and roasting—ideal for baking enthusiasts.

Finally, the GE JGBP33GES combines traditional and modern features with its intuitive controls and a spacious oven design. This model offers precision cooking with adjustable temperature settings, ensuring that every dish is cooked to perfection. The dual fuel capability gives users the flexibility to enjoy the instant heat of gas with the precision of an electric oven, appealing to a wide range of culinary preferences.

Together, these GE gas ranges represent a harmonious blend of performance, convenience, and modern design, catering to diverse cooking needs and enhancing the overall kitchen experience. From family dinners to gourmet meals, these models stand ready to deliver reliable performance for any culinary enthusiast.
Top Page Image Contents