GE JGBS19 To Set the Clock, To Set the Timer, To Reset the Timer, To Cancel the Timer, Safety

Models: JGBS19

1 52
Download 52 pages 30.67 Kb
Page 16
Image 16
Using the clock and timer.

Instructions

 

 

 

 

 

 

Using the clock and timer.

Safety

Operating Instructions

Not all features are on all models.

To Set the Clock

Touch the Clock pad twice.

Touch the + or pads.

If the + or pads are not touched within one minute after you touch the Clock pad, the display reverts to the original setting. If this happens, touch the Clock pad twice and reenter the time of day.

Make sure the clock is set to the correct time of day.

Touch the Start/On pad until the time of day shows in the display. This enters the time and starts the clock.

To check the time of day when the display is showing other information, simply touch the Clock pad. The time of day shows until another pad is touched.

To Turn Off the Clock Display

Care and Cleaning

If you have several clocks in your kitchen, you may wish to turn off the time of day clock display on your range.

Touch the Clock pad once to turn off the time of day display. Although you will not be able to see it, the clock maintains the correct time of day.

Touch the Clock pad twice to recall the clock display.

Installation

Instructions

To Set the Timer

The timer does not control oven operations. The maximum setting on the timer is 9 hours and 59 minutes.

Touch the Kitchen Timer On/Off pad.

Touch the + or pads until the amount of time you want shows in the display. The maximum time that can be entered in minutes is 59. Times more than

59 minutes should be changed to hours and minutes.

The timer is a minute timer only.

Touch the Start/On pad. The time will start counting down, although the display does not change until one minute has passed.

When the timer reaches :00, the control will beep 3 times followed by one beep every 6 seconds until the Kitchen Timer On/Off pad is touched.

Troubleshooting Tips

Consumer Support

The Clear/Off pad does not affectIf you make a mistake, touch the Kitchen
the timer.Timer On/Off pad and begin again.

To Reset the Timer

If the display is still showing the time

If the remaining time is not in the display

remaining, you may change it by touching

(clock is in the display), recall the remaining

the Kitchen Timer On/Off pad, then touch the

time by touching the Kitchen Timer On/Off

+ or pads until the time you want appears

pad and then touching the + or pads to

in the display.

enter the new time you want.

To Cancel the Timer

Touch the Kitchen Timer On/Off pad twice.

Power Outage

If a flashing time is in the display, you haveTo reset the clock, touch the Clock pad. Enter
experienced a power failure. Reset the clock.the correct time of day by touching the + or

16

pads. Touch the Start/On pad.
Page 16
Image 16
GE JGBS19 To Set the Clock, To Set the Timer, To Reset the Timer, To Cancel the Timer, Power Outage, Instructions, Safety