Control Panel
It’s a good idea to wipe the control panel after each use. Clean with mild soap and water or vinegar and water, rinse with clean water and polish dry with a soft cloth.
Do not use abrasive cleansers, strong liquid cleaners, plastic scouring pads or oven cleansers on the control
Glass Surfaces
To clean the outside glass finish, use a glass cleaner. Rinse and polish with a dry cloth. Do not allow the water or cleaner to run down inside openings in the glass or the openings in the top of the oven door while cleaning.
Metal Parts
Do not use steel wool, abrasives, ammonia or commercial oven cleaners. To safely clean surfaces: wash, rinse and then dry with a soft cloth.
PROBLEM
OVEN WILL
NOT WORK
OVEN LIGHT DOES NOT WORK
FOOD DOES NOT BROIL PROPERLY
FOOD DOES NOT ROAST OR BAKE PROPERLY
POSSIBLE CAUSE
●This is the function error code. Press the CLEARKWF pad. Allow oven to cool 1 hour. Place oven back into operation. If function error occurs again, disconnect power to the oven and call for service.
●The circuit breaker in your house has been tripped, or a fuse has been blown.
●Oven controls not properly set.
●Light bulb is loose or defective. Tighten or replace.
●Button operating oven light is broken, Call for service.
●The oven controls are not properly set. See the Broiling section.
●The door not left ajar as recommended.
*Improper shelf position being used.
●Food is being cooked on a hot pan.
*Cookware is not suited for broiling.
●Low voltage. See the Broiling section.
●Aluminum foil used on the broiler pan grid has not been fitted properly
and slit as recommended.
●The oven controls are not properly set. See the Baking or Roasting section.
●Shelf position is not correct.
~Incorrect cookware of improper size is being used.
●The oven thermostat needs adjustment. See the Adjust the Oven Thermostat– Do It Yourse~section.
