OPERATING THE SELF-CLEANING OVEN

(continued)
After a Clean Cycle
When the clean cycle is finished, the word “CLEAN” After a clean cycle, you may notice some white ash in
will go out in the display and the oven will begin to the oven. Just wipe it up with a damp cloth. If white
cool. When the oven temperature has fallen below the spots remain, remove them with a soap-filled steel wool
locking temperature, the word “LOCK” goes out and
pad. Be sure to rinse thoroughly with a vinegar and
the door can be opened. water mixture. These deposits are usually a salt residue
that cannot be removed by the clean cycle.
If the oven is not clean after one clean cycle, the cycle
may be repeated.
How to Delay Start of Cleaning
Delay Start is setting the oven timer to start the clean
cycle automatically at a later time than the present
time of day. NOTE: Before beginning, make sure the
oven clock shows the correct time of day.
Quick Reminder—Delay Start for Self-Clean:
1.
Prepare the oven for cleaning.
2. Press the CLEAN pad.
3. Press the INCREASE pad.
4. Press the STOP TIME pad.
Time that appears is 3 hours later than the time of
day. Press the INCREASE pad until the Stop Time
you desire appears in the display. The self-clean
cycle will automatically begin 3 hours before the
Stop Time you select.
For example: Let’s say it’s
7:00
and you want the
oven to begin self-cleaning at
9:00
after you’re
finished in the kitchen. The oven is just soiled a
normal amount so the normal Clean Time of 3 hours
is
prefemed.
Step 1: Prepare the oven for cleaning.
Step 2: Close the oven door.
CLEAN

A

22
Step 3: Press the CLEAN pad.
Step 4: Press the INCREASE pad.
Step 5: Clean Time for heavy soil can be set for
4 hours.
If
a longer or shorter Clean Time is desired,
press the INCREASE or DECREASE pad until
desired Clean Time is displayed.
c1
STOP
TIME
Step 6: Press the STOP TIME pad.
“10:00”
appears on display and
“STOP TIME” flashes. The control
automatically sets Stop Time by
adding the Clean Time to the time of
day. In this example, the time of day is
7:00
and the Clean Time is 3 hours.
Adding 3 hours to the time of day
equals
10:00.
Ste~ 7:
Change
Stou
Time from
10:00
to
12:00
by
pre~sing
the I~CREASE pad until
“12:00”
appe&
in the display. The words “DELAY CLEAN” will also
appear in the display.
The self-clean cycle will automatically begin at
9:00
and finish at
12:00.
The word “ON” will appear on
the display at
9:00.
When the oven locks, the word “LOCK” will be
displayed and the door will be locked in position. It
will not be possible to open the oven door until the
temperature drops below the lock temperature.
When the clean cycle is finished, the word “CLEAN”
will go out in the display and the oven will begin to
cool. When the oven temperature has fallen below
the locking temperature, the word “LOCK” goes out
and the door can be opened.
Step 8: When the LOCK light is off open the door.
—