GE JP330P warranty Infinite Heat Controls, Sensi-Temp TM Control, How to Set the Controls

Controls

Infinite Heat Controls

1	z
{0	I	3
	k.	/

~o —.-aw 4

\

@

*,

5

7/

6

Guide for Using Heats

HI (7)—Bring water to boil.

MEDIUM HI (5-6)—Fast fry, pan broil; maintain fast boil on large amount of food.

MED (4)—Saute and brown; maintain slow boil on large amount of food.

MEDIUM LO (2-3)—Cook after starting at HI; cook with little water in covered pan.

LO (l)---Steam rice, cereal; maintain servimz temperature of most foods.

“,

NOTE:

1.At HI (7) or MEDIUM HI (5-6), never leave food unattended. Boilovers cause smoking; greasy spillovers may catch fire.

2.At LO (1) or MEDIUM LO

(2-3), melt chocolate, butter on small element.

Sensi-Temp TM Control

This control allows you to pre- select the heat setting. To turn the element ON, push in and turn the knob counterclockwise. You will feel a “click” at the OFF position.

The automatic element senses the temperature of the pan and regulates it according to the setting selected.

When turned on, the Sensi-Temp element always begins with full power, no matter where the knob is set. When the temperature corresponding to that setting has been reached; the element cycles OFF and ON to maintain the selected setting. Even when the dial is set at minimum, the element begins on full power until the selected heat setting is reached.

The Sensi-Temp element will not burn food when the correct setting is selected. Food may dehydrate if left on but the heat sensing device will not let the food or uan overheat beyond the se~ting.

Cooktop temperatures increase with the number of elements that are on. With 3 or 4 elements turned on, surface temperatures are high, so be careful when touching the cooktop.

How to Set the Controls –

Step 1: Push control knob down.

Step 2: Turn the knob to desired heat setting.

Control must be pushed in to set only from OFF position. When control is in any position other than OFF, it maybe rotated without pushing in.

Be sure you turn the control knob to OFF when you finish cooking. An indicator light will glow when a surface unit is on

—

6