Using the lower oven controls.

ge.com

Throughout this manual, features and appearance may vary from your model.

Lower Oven Control, Clock and Timer Features and Settings

Safety Instructions Operating Instructions

Display

Shows the time of day, oven temperature, whether the oven is in the bake, broil or self- cleaning mode and the times set for the timer or automatic oven operations.

NOTE: The time on the lower oven display is shown in hours and minutes (1:30 is one hour, 30 minutes). On the microwave, time is shown in minutes and seconds (1:30 is one minute, 30 seconds).

If “F– and a number or letter” flash in the display and the oven control signals, this indicates a function error code. Press the CLEAR/OFF pad. Allow the oven to cool for one hour. Put the oven back into operation. If the function error code repeats, disconnect the power to the oven and call for service.

If your oven was set for a timed oven operation and a power outage occurred, the clock and all programmed functions must be reset.

The time of day (may be incorrect) will flash in the display when there has been a power outage.

CONVECTION ROAST Pad

Press to select roasting with convection.

CONVECTION BAKE MULTI/1 RACK Pad

Press once to select convection baking with multiple racks. Press twice to select convection baking with one rack.

Number Pads

Use to set any function requiring numbers such as the time of day on the clock, the timer, the oven temperature, the internal food temperature, the start time and length of operation for timed baking and self-cleaning.

CLEAR/OFF Pad

Press to cancel ALL oven operations except the clock and timer.

PROBE Pad

Press when using the probe to cook food to the desired internal temperature. (For use in the lower oven only.)

SELF CLEAN STD/LOW Pad

Press to select the self-cleaning function. See the Using the self-cleaning lower oven section.

START Pad

Must be pressed to start any cooking or cleaning function.

KITCHEN TIMER ON/OFF Pad

Press to select the timer feature.

OVEN LIGHT Pad

Press to turn the oven light on or off.

Care and Cleaning Troubleshooting Tips

BROIL HI/LO Pad

Press to select the broil function.

WARM/PROOF Pad

Press once to keep hot, cooked foods warm. See the How to Set the Oven for Warming section. Press twice to select a warm environment useful for rising yeast- leavened products.

BAKE Pad

Press to select the bake function.

DELAY START Pad

Use along with COOKING TIME or SELF CLEAN pads to set the oven to start and stop automatically at a time you set.

COOKING TIME Pad

Press and then press the number pads to set the amount of time you want your food to cook. The oven will shut off automatically when the cooking time has run out, unless the WARM feature was set.

CLOCK Pad

23

Press before setting the clock.

Consumer Support

Page 23
Image 23
GE JT96530 manual Using the lower oven controls, Care and Cleaning Troubleshooting Tips

JT96530 specifications

The GE JT96530 is a cutting-edge jet engine that represents a significant advancement in aviation technology, specifically designed for use in regional and narrow-body aircraft. As the industry continues to evolve towards increased fuel efficiency and reduced emissions, the JT96530 stands out for its performance, state-of-the-art engineering, and innovative features.

One of the main highlights of the GE JT96530 is its high bypass ratio, which contributes to improved fuel efficiency. The engine's design allows for a larger volume of air to bypass the core engine compared to the amount that goes through the combustion chamber. This not only enhances fuel burn efficiency but also reduces noise, making it an environmentally friendly option for airlines and airports. The incorporation of advanced materials, including lightweight titanium and composite components, further optimizes performance and durability while keeping the engine lightweight.

Technologically, the JT96530 is equipped with advanced digital engine controls that enable precise management of engine performance throughout various phases of flight. This system enhances operational efficiency by allowing for real-time monitoring and adjustments, optimizing fuel consumption, and improving overall engine reliability. The engine's design incorporates a staggered fan blade layout, which enhances airflow and further increases efficiency and thrust.

Additionally, the JT96530 features a robust cooling system that ensures parts are maintained at optimal temperatures, enhancing overall engine longevity. The advanced thermal management techniques not only improve performance but also extend maintenance intervals, reducing operational costs for airlines.

The engine’s maintenance is simplified by the modular design, allowing for quick and efficient servicing. Operators benefit from reduced downtime, increasing aircraft availability and overall operational efficiency. The JT96530 is also designed with a focus on sustainability, aligning with global initiatives to decrease carbon emissions in aviation, making it a preferred choice for environmentally conscious operators.

In summary, the GE JT96530 engine combines advanced aerodynamics, innovative materials, and state-of-the-art technology, setting a new standard in the aviation industry. Its remarkable efficiency, reduced environmental impact, and ease of maintenance make it an ideal choice for airlines looking to modernize their fleet while meeting the demands of a rapidly changing world. This engine not only delivers exceptional performance but also reflects a commitment to sustainable aviation for the future.