ge.com

Problem

Possible Causes

What To Do

 

 

 

 

Lower oven light does

Light bulb is loose or defective.

Tighten or replace the bulb.

not work

 

 

 

Pad operating light is broken. Call for service.

 

 

 

 

“F— and a number or

You have a function

Press the CLEAR/OFF pad. Allow the oven to cool for one

letter” flash in the

error code.

hour. Put the oven back into operation.

lower oven display

 

 

 

If the function code repeats.

Disconnect all power to the cooking center for at

 

 

 

 

least 30 seconds and then reconnect power. If the

 

 

 

function error code repeats, call for service.

 

 

 

Display flashes

Power failure.

Reset the lower oven clock.

 

 

 

Unable to get the

Oven control pads were

The BAKE and BROIL HI/LO pads must be pressed

lower oven display

not pressed properly.

at the same time and held for 3 seconds.

to show “SF”

 

 

 

 

 

 

“Probe” appears

This is reminding you to

Enter a probe temperature.

in the lower

enter a probe temperature

 

oven display

after plugging in the probe.

 

 

 

 

Power outage,

Power outage or surge.

Reset the clock. If the oven was in use, you must reset

clock flashes

 

 

it by pressing the CLEAR/OFF pad, setting the clock

 

 

 

and resetting any cooking function.

 

 

 

Steam from the

When using the convection

This is normal.

vent when using

feature, it is normal to see

 

the lower oven

steam coming out of the oven

 

 

vent. As the number of shelves

 

 

or amount of food being

 

 

cooked increases, the amount

 

 

of visible steam will increase.

 

 

 

“Burning” or “oily”

This is normal in a new oven To speed the process, set a self-clean cycle for a

odor emitting from

and will disappear in time.

minimum of 3 hours. See the Using the self-cleaning

oven vent when using

 

 

lower oven section.

the lower oven

 

 

 

 

 

 

Strong odor in the

An odor from the insulation

This is temporary.

lower oven

around the inside of the

 

 

oven is normal for the first

 

 

few times the oven is used.

 

 

 

Fan noise when using

A cooling fan or a convection This is normal. The cooling fan will turn on

the lower oven

fan (depending on the function to cool internal parts. It may run for up to 1-1/2

 

you are using) may automatically hours after the oven is turned off. The convection

 

turn on.

fan will cycle on and off until the function is over

 

 

 

or the door is opened.

 

 

 

 

49

Safety Instructions Operating Instructions Care and Cleaning Troubleshooting Tips Consumer Support

Page 49
Image 49
GE JT96530 manual Letter flash, Lower oven display, Display flashes, Unable to get, To show SF Probe appears, Oven display

JT96530 specifications

The GE JT96530 is a cutting-edge jet engine that represents a significant advancement in aviation technology, specifically designed for use in regional and narrow-body aircraft. As the industry continues to evolve towards increased fuel efficiency and reduced emissions, the JT96530 stands out for its performance, state-of-the-art engineering, and innovative features.

One of the main highlights of the GE JT96530 is its high bypass ratio, which contributes to improved fuel efficiency. The engine's design allows for a larger volume of air to bypass the core engine compared to the amount that goes through the combustion chamber. This not only enhances fuel burn efficiency but also reduces noise, making it an environmentally friendly option for airlines and airports. The incorporation of advanced materials, including lightweight titanium and composite components, further optimizes performance and durability while keeping the engine lightweight.

Technologically, the JT96530 is equipped with advanced digital engine controls that enable precise management of engine performance throughout various phases of flight. This system enhances operational efficiency by allowing for real-time monitoring and adjustments, optimizing fuel consumption, and improving overall engine reliability. The engine's design incorporates a staggered fan blade layout, which enhances airflow and further increases efficiency and thrust.

Additionally, the JT96530 features a robust cooling system that ensures parts are maintained at optimal temperatures, enhancing overall engine longevity. The advanced thermal management techniques not only improve performance but also extend maintenance intervals, reducing operational costs for airlines.

The engine’s maintenance is simplified by the modular design, allowing for quick and efficient servicing. Operators benefit from reduced downtime, increasing aircraft availability and overall operational efficiency. The JT96530 is also designed with a focus on sustainability, aligning with global initiatives to decrease carbon emissions in aviation, making it a preferred choice for environmentally conscious operators.

In summary, the GE JT96530 engine combines advanced aerodynamics, innovative materials, and state-of-the-art technology, setting a new standard in the aviation industry. Its remarkable efficiency, reduced environmental impact, and ease of maintenance make it an ideal choice for airlines looking to modernize their fleet while meeting the demands of a rapidly changing world. This engine not only delivers exceptional performance but also reflects a commitment to sustainable aviation for the future.